PDA

View Full Version : v40 1.9d no boost pressure. Help! !!



CONDYBOY
Saturday 15th November 2014, 15:42
As in the title. Boost gauge only showing a small negative pressure when revving. Variable vane actuator moving nicely so vac system is fine. Turbo is spinning nicely. No leaks in system. I'm bamboozled.

stribo
Saturday 15th November 2014, 17:08
Does it feel like it's boosting? if so could just be the feed pipe to your gauge needs looking at, if not check the wastegate isn't stuck open.

CONDYBOY
Saturday 15th November 2014, 21:01
Where's the waste gate? There's the vacuum plunger on the turbo working fine when I blip the throttle on the drive. I thought that was what controlled the variable vanes inside the turbo. Am I wrong?