View Full Version : Anyone using external recirc valves?
Dream3r
Tuesday 4th November 2014, 19:21
I was wondering what spring pressure (if you've measured it) the piston opens?
I have mine set up and it seems to be running fine, -0.8bar, just musing for more info as I might try it lower but it involves a fair bit of fiddling!
John.
Dangerous Dave
Tuesday 4th November 2014, 22:54
Think Wobbly Dave is running one on his beastie
LeeT5
Friday 7th November 2014, 18:27
I'm using a Forge Motorsport recirc valve with the stock spring removed and a yellow one in it's place.
Dream3r
Saturday 8th November 2014, 13:41
I'm using a Forge Motorsport recirc valve with the stock spring removed and a yellow one in it's place.
External? Which one?
LeeT5
Saturday 8th November 2014, 14:14
What do you mean by external? Do you mean seperate to the turbo? IE, the oe recirc valve blanked off and a seperate valve? If so, ignore my post.
Dream3r
Saturday 8th November 2014, 15:57
What do you mean by external? Do you mean seperate to the turbo? IE, the oe recirc valve blanked off and a seperate valve? If so, ignore my post.
I'm not sure how else it can be interpreted, lol. Yes external from the turbo, i.e. not built in-to the compressor cover and not stock.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.