PDA

View Full Version : C30 rear wheel camber problem



mick1275
Sunday 2nd November 2014, 18:28
What reason (s) would cause my passenger side rear wheel to have a -5 degrees camber it should be around -1.7 to -2.7 it's on a c30

stribo
Sunday 2nd November 2014, 18:30
First thing would be to check if a bush has collapsed, failing that make sure none of the arms on the rear are bent.

Harvey
Sunday 2nd November 2014, 18:52
I Had a car that had a bent brace due to the car transporter used it as a lashing point.

mick1275
Sunday 2nd November 2014, 21:38
The tyre is wearing/shaping in an odd fashion looking at the tyre with a ruler across the tread it's higher from the inside than the outside and from centre of tyre to outside it gradually has started to wear off more the ruler slopes across top quiet a lot, there is also a dark black line about 5 mm wide all around the very inside edge right were the tread ends and moulds round to the side wall it's no a wear line it's like dust it rubs off easy but still see the line .could these be important visual signs on the tyre to what's gone wrong