PDA

View Full Version : Wiring diagram for the HT coil



oblark
Friday 19th September 2014, 21:35
I need to identify the leads that go to the HT coil so I can tap into the live lead.

Harvey
Friday 19th September 2014, 23:11
Here you go.

http://i1168.photobucket.com/albums/r499/harveysr/imagejpg1_zpse6df5e52.jpg (http://s1168.photobucket.com/user/harveysr/media/imagejpg1_zpse6df5e52.jpg.html)

http://i1168.photobucket.com/albums/r499/harveysr/imagejpg2_zps86394e2e.jpg (http://s1168.photobucket.com/user/harveysr/media/imagejpg2_zps86394e2e.jpg.html)

MoleT-5R
Friday 19th September 2014, 23:52
but in Rob's car it will be a single supply that goes to the ignition coil on the n/s suspension turret, easy to identify just stick a multimeter on the multi plug and trace it back, this is run from inside the car, out and across the bulkhead and on to the coil, it is not in the engine harness like Colin thought

Harvey
Saturday 20th September 2014, 00:13
I thought Rob was fitting coil packs as his next project ?.

Looking at it there's a live feed,Earth,triggers from ECU.

MoleT-5R
Saturday 20th September 2014, 01:04
as he said he needs to tap into the live feed, which on his car is a single one, I'm assuming he'll take take that to his electronics to feed his COP output. I hope I'm right and have understood some of his excellent posts

oblark
Saturday 20th September 2014, 09:32
but in Rob's car it will be a single supply that goes to the ignition coil on the n/s suspension turret, easy to identify just stick a multimeter on the multi plug and trace it back, this is run from inside the car, out and across the bulkhead and on to the coil, it is not in the engine harness like Colin thought

Thanks :)


I thought Rob was fitting coil packs as his next project ?.

Looking at it there's a live feed,Earth,triggers from ECU.

The power for the COP`s comes from the HT coil supply

The triggers for the COP`s come from the ecu.


as he said he needs to tap into the live feed, which on his car is a single one, I'm assuming he'll take take that to his electronics to feed his COP output. I hope I'm right and have understood some of his excellent posts

Yeap your right :)

oblark
Saturday 20th September 2014, 18:37
I found this today, it`s the blue/red wiring and it comes from the fuse board.

26827