PDA

View Full Version : rip kit fitting



polak t5r
Thursday 18th September 2014, 14:04
Hi all I need to know if a rip kit of a 850 t5 will fit my s70r manual cheers I was worried about the hose going onto the turbo as I know mine has a larger turbo then a 850 cheers

MoleT-5R
Thursday 18th September 2014, 14:09
I don't see why it should not fit, as you say your turbo is larger, you may need a different reducer/adaptor for that bit, easily available from someone like Ash silicone hoses

polak t5r
Thursday 18th September 2014, 14:12
Cool thanks does anyone know what size adapter id need

stribo
Thursday 18th September 2014, 14:17
The hose that goes on the turbo is normally bigger anyway so there's a bit of slack, on the aftermarket kits, don't know about the Volvo one, but I suppose you could use the hose that's already there.

polak t5r
Thursday 18th September 2014, 14:22
Cool ill have to have a play and see what happens cheers

MoleT-5R
Thursday 18th September 2014, 14:24
the first question is whether the turbo's outlet pipe is larger than the standard one and what turbo is it ??

p fandango
Thursday 18th September 2014, 14:42
All td04's have the same size outlet

stribo
Thursday 18th September 2014, 15:00
All td04's have the same size outlet
Are you sure? You told me all TD04s had the same hot side, and that turned out not to be the case.

Ettienne
Thursday 18th September 2014, 15:09
51mm iirc all the same.

The 12t has a different exhaust housing the rest are the same.

p fandango
Thursday 18th September 2014, 15:10
Are you sure? You told me all TD04s had the same hot side, and that turned out not to be the case.
Sorry, all Volvo td04's do

Ettienne
Thursday 18th September 2014, 15:22
The 3" angle exhaust housing is different on the 12t as they have a smaller exhaust turbine wheel. So the hit side is different on the 12t, but that's the only one that is.

polak t5r
Friday 19th September 2014, 13:02
it has the standard s70r manual turbo on is it 18t

stribo
Friday 19th September 2014, 13:14
The 3" angle exhaust housing is different on the 12t as they have a smaller exhaust turbine wheel. So the hit side is different on the 12t, but that's the only one that is.

And guess which one I bought for the angle flange. :slap:

MoleT-5R
Friday 19th September 2014, 13:52
All td04's have the same size outlet

that's what I thought, but I wasn't going to post it just in case I'd heard it wrong..:hidesbehi

Biff
Friday 19th September 2014, 15:28
it has the standard s70r manual turbo on is it 18t

Yes mate should be an 18t

AshDVS
Monday 22nd September 2014, 14:51
Assuming that both are stock and havent been fitted with non-volvo or aftermarket turbos, there should be no issue at all.