s40 t4 p1 injector upgrade

[weemo1rush]

s40 t4 p1 injector upgrade
Hello chaps.
OK I'm after a few pointers. I have a mild modified s40 t4 p1. Exhaust , Panel filter, actuator adjusted.
I'm thinking of an adjustable fuel pressure regulator. And some new injectors I've been told that bosch reds work well for un upgrade from standard greys.
Any of you guys done similar?
Regards Davo

[smithy]

The p2 40 series uses Bosch reds standard on the t4 and are 440cc.but you might need a custom remap to get them to work properly on the p1 40 series.

[weemo1rush]

The p2 40 series uses Bosch reds standard on the t4 and are 440cc.but you might need a custom remap to get them to work properly on the p1 40 series.



I was thinking going to 550cc with a adjustable regulator. then get a map done to suit the set up

[mitchyboy01]

No one can custom map the phase 1 T4. MTE used to do them but don't any more. You can get the generic 240bhp map but nothing custom. You will need a standalone to do it properly or just play with fuel pressure but it will be a bodge at best. If you buy a phase 2 there is a guy who can help.

[weemo1rush]

So I'm stuck for mapping then. What's the best line of action then ? Chip?

[weemo1rush]

If im looking to get 300hp what line is best for the seemingly un mappable t4 p1

[siamblue]

I might have a set of reds here from my V40 T4 i will have to check..

[weemo1rush]

I might have a set of reds here from my V40 T4 i will have to check..

Yea let me know

[mitchyboy01]

I was aiming for more than 300bhp with my phase 1 and had a forged engine and big turbo etc. The limiting factor was I couldn't find anyone to custom map it for bigger injectors. I tweaked fuel pressure and ended up with 286bhp but it wasn't Ideal. I was gutted I had to break the car in the end.

[mitchyboy01]

I have a straight drop in alloy intercooler I may sell but unsure yet as I may fit it to my phase 2. In 2 minds atm.

[weemo1rush]

I have a straight drop in alloy intercooler I may sell but unsure yet as I may fit it to my phase 2. In 2 minds atm.

Get bk to me if you decide to sell. Is it a named make?

[mitchyboy01]

No it was custom made for Ashok on T5D5 and was fine running over 400bhp so a good bit of kit, hence me being in 2 minds. I may put it in my phase 2 when I get my 6 pots fitted in a few weeks. I don't want to sell but I'm trying to prep my bike for the track and being skint doesn't help lol

[weemo1rush]

No it was custom made for Ashok on T5D5 and was fine running over 400bhp so a good bit of kit, hence me being in 2 minds. I may put it in my phase 2 when I get my 6 pots fitted in a few weeks. I don't want to sell but I'm trying to prep my bike for the track and being skint doesn't help lol

Well let me know big man..