no1tosh
Saturday 22nd March 2014, 21:37
well i hav'nt had much time over the last few months what with work and doing a lot of mountain biking, but im finnaly getting back on to the volvo again.
She had her mot the other week. I got away with a wishbone and CV boot:funkybana
so over the last few weeks ive put new pads and disks all round along with new shoes, and im still trying despratly to get to the bottom of this jerking on decleration!
so far ive cleaned the throttle body and isv and checked all the ajustments.
checked all vac lines and pipe work
checked ignition and found my plugs very fouled up and 2 had cracks in the porsoline, so all 5 have been replaced with bosch ones.
ive put the origonal ecu back in and tryed to be as violent as i can letting off the throttle and it wont do it.
ive made a wastegate ajustment tool and set it to 4psi
after all this it drives so much better and is alot faster after sorting the wastegate, but theres still something anoying my rica 304!!
im at a complete loss now as mine is one that has obd2 but scanners wont go in.
She had her mot the other week. I got away with a wishbone and CV boot:funkybana
so over the last few weeks ive put new pads and disks all round along with new shoes, and im still trying despratly to get to the bottom of this jerking on decleration!
so far ive cleaned the throttle body and isv and checked all the ajustments.
checked all vac lines and pipe work
checked ignition and found my plugs very fouled up and 2 had cracks in the porsoline, so all 5 have been replaced with bosch ones.
ive put the origonal ecu back in and tryed to be as violent as i can letting off the throttle and it wont do it.
ive made a wastegate ajustment tool and set it to 4psi
after all this it drives so much better and is alot faster after sorting the wastegate, but theres still something anoying my rica 304!!
im at a complete loss now as mine is one that has obd2 but scanners wont go in.