PDA

View Full Version : Removing air con on a 96 940....



pwalker
Thursday 6th February 2014, 15:11
Basically iv already removed the air con but just wondering if there's anything else I need to do before I scrap everything, Iv kept all the plugs etc. reason being I know when you removing it on a gt4 you have to do some short a wire or the radiator fans run constantly....I didn't know that untill I binned everything haha, so yeah just checking I don't have to do anything simelar on this, iv kept all plugs etc incase

artfulflounder
Thursday 6th February 2014, 16:00
Did a quick search and found this:

Leave the belt in place but disconnect the electrical wires to the compressor/clutch. The clutch on the compressor will spin freely and the compressor will no longer pull hp from the engine.

smithy
Thursday 6th February 2014, 16:04
Remove everything and put a none aircon belt on job done

pwalker
Thursday 6th February 2014, 16:13
Why put the belt on? Iv removed the pump itself

pwalker
Thursday 6th February 2014, 16:14
Or does the alternator normaly run off the same belt and someone's already swapped it? As there was no aircon belt on to start but the pump was there