View Full Version : Removing air con on a 96 940....
pwalker
Thursday 6th February 2014, 15:11
Basically iv already removed the air con but just wondering if there's anything else I need to do before I scrap everything, Iv kept all the plugs etc. reason being I know when you removing it on a gt4 you have to do some short a wire or the radiator fans run constantly....I didn't know that untill I binned everything haha, so yeah just checking I don't have to do anything simelar on this, iv kept all plugs etc incase
artfulflounder
Thursday 6th February 2014, 16:00
Did a quick search and found this:
Leave the belt in place but disconnect the electrical wires to the compressor/clutch. The clutch on the compressor will spin freely and the compressor will no longer pull hp from the engine.
smithy
Thursday 6th February 2014, 16:04
Remove everything and put a none aircon belt on job done
pwalker
Thursday 6th February 2014, 16:13
Why put the belt on? Iv removed the pump itself
pwalker
Thursday 6th February 2014, 16:14
Or does the alternator normaly run off the same belt and someone's already swapped it? As there was no aircon belt on to start but the pump was there
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.