turbo intake size?

[T5frankie]

can anyone tell me the exact size hose ill need to fit onto the intake side of my 19t? thanks

[MoleT-5R]

can anyone tell me the exact size hose ill need to fit onto the intake side of my 19t? thanks

I would, but it's peeing down with rain to be ripping Jayne's car apart mate

[T5frankie]

I would, but it's peeing down with rain to be ripping Jayne's car apart mate

helpful mate, it would be the same as any td04 mate lol

[MoleT-5R]

helpful mate, it would be the same as any td04 mate lol

I want to measure the T5's one as I'm thinking of modding it from filter to turbo, but the weather is s£££e and the garage is full of 2.0l v70 at present, so my have to wait a day or so, but it will have to come in during this week as I've got to change the turbo oil feed pipe which has cracked

[artfulflounder]

I believe 15g,16t and 19s had same size from compressor.

[MoleT-5R]

I believe 15g,16t and 19s had same size from compressor.

aye, frankie has said that all the td04's were the same, just don't no what it is

[T5frankie]

i just need to know what size hose to buy 50mm? 60mm?

[960kg]

60mm internal hose

[T5frankie]

60mm internal hose

is that a fact keith?

[960kg]

Yes, i am sitting looking at my old 16T on the table and also my 3" intake pipe i have made but not yet fitted...........60mm external Turbo inlet side so 60mm internal hose

[T5frankie]

Yes, i am sitting looking at my old 16T on the table and also my 3" intake pipe i have made but not yet fitted...........60mm external Turbo inlet side so 60mm internal hose

thanks alot mate, i'm building my own too

[960kg]

Excuse the string Lol.......it is holding the lot up while i took a pic.



..........................................

[MoleT-5R]

thanks alot mate, i'm building my own too

me too, well got to finish off the intake system before the season starts

[T5frankie]

Excuse the string Lol.......it is holding the lot up while i took a pic.



..........................................

keith that brass inlet piece, how is it fitted? has it got a self tapping other side? did you just drill a hole and screw it in?

[Wobbly Dave]

I have the inlet pipe work from my 19T which you are welcome to have. It includes a D-shaped hole for the PTC grommet.

[MoleT-5R]

keith that brass inlet piece, how is it fitted? has it got a self tapping other side? did you just drill a hole and screw it in?

most probably a nut on the underside

[T5frankie]

mine didn't have that extra inlet so ive drilled a hole for the ptc in some 3" pipe i had, fits nice so would a 45 or 90 degree silicone reducer be best?

[p fandango]

i'm sure it does go 60mm on the turbo, 70mm on the MAF then i've gone upto 76mm into the cone filter/bypass valve. I've used a shallower 45degree on the turbo

http://imagizer.imageshack.us/v2/800x600q90/268/8tjf.jpg

[T5frankie]

i'm sure it does go 60mm on the turbo, 70mm on the MAF then i've gone upto 76mm into the cone filter/bypass valve. I've used a shallower 45degree on the turbo

http://imagizer.imageshack.us/v2/800x600q90/268/8tjf.jpg

im having 60mm off the turbo into 3" all the way up to the air filter

[p fandango]

im having 60mm off the turbo into 3" all the way up to the air filter
I've already got a 3" maf, but only going to be running a standard(ish) ecu so trying to keep it relatively standard so it doesn't try confused

[deathrider311271]

not at work today Frankie????

[T5frankie]

not at work today Frankie????

lol how observant, no one of sons is in hospital having his adenoids out and his tonsils so i'm home looking after the little 'un

[deathrider311271]

lol how observant, no one of sons is in hospital having his adenoids out and his tonsils so i'm home looking after the little 'un

nice one mate, my truck is in for mot today!!!!!!!!!!

[T5frankie]

nice one mate, my truck is in for mot today!!!!!!!!!!

good luck for that then mate

[960kg]

keith that brass inlet piece, how is it fitted? has it got a self tapping other side? did you just drill a hole and screw it in?

Rather than repeat all here just read all this thread i did....... (http://www.volvotuning.net/topic/4732-intake/)

[T5frankie]

its all done now just waiting for my reducer to turn up then its finished