PDA

View Full Version : Locking wheel nuts are annoying



craigieboy
Tuesday 10th December 2013, 17:54
Ok so I thought after work I should swop my wheels around on the s80 as the tyres on the back are better and have more tread and it will only take ten minutes. Yeah right then. Jacked it all up so it was safe undone the nuts on the front (no locker nut) undone the ones on the back wich had a locker nut so rumiged thre the boot and found it looked at in and oh look the teath are rounded to the limit that it just slips!!! Not happy

LeeT5
Tuesday 10th December 2013, 19:25
All you need to do mate is drive to your local dealer. They will have a master key which will remove all the lockers. Will only take them 15 minutes. You can replace them with OE bolts, I did!!

Dont get involved with trying to hammer on an old socket, the risk of damaging your alloys is very high mate.