Is it possible to remove the exterior door rub strips from the outside?

[Leeds_finest]

As above, or do the interior door cards/panels need to come off?


Thanks

Ed

[M-R-P]

They slide off mate but I can't remember which way lol.

[Nealevo]

they slide off backwards on a 850 and then lift up at an angle, the first clip was rivited in on mine, so be careful not to break it like i did

[M-R-P]

That's why they invented gripfill ;)

[The Flying Banana]

Open the door ...you will see a small hole inline with the strip...a torx in there, take it out and then you can slide strip towards rear of car an inch and it will come off

[Leeds_finest]

Perfect thank you very much guys.

[t5steve]

they can be removed completely but will need filling and painting

http://i1167.photobucket.com/albums/q634/angliamania/PICT0020.jpg (http://s1167.photobucket.com/user/angliamania/media/PICT0020.jpg.html)

[Biff]

they can be removed completely but will need filling and painting

http://i1167.photobucket.com/albums/q634/angliamania/PICT0020.jpg (http://s1167.photobucket.com/user/angliamania/media/PICT0020.jpg.html)
That looks rather well! :)
I may go a bit euro when I paint mine. Very good inspiration there. ;)