best after market turbo

[Plodmonkey]

What is the best after market turbo and what would I have to do to push my v70 phase 2 upto a stable every day drive 350bhp + I no a full 3inch exhaust and custom map but would I need standalone fuel pump or can standard one take it and what price am I looking at ruffly

Cheers
Gav

[T5frankie]

2.3 or 2,4?

[Plodmonkey]

2.3 mate

[p fandango]

standard pump won't do that, Walbro 255lph should cope & is direct replacement. As for turbo, 19t it

[Plodmonkey]

Will that work fine running a rica 310 on a standard car

[p fandango]

Will that work fine running a rica 310 on a standard car
Not really, u'll need a custom map to get to your 350 & bigger fuel injectors

[Plodmonkey]

So a 19t custom map fuel pump exhaust and set of injectors don't sound two bad how much am I looking at

[T5frankie]

So a 19t custom map fuel pump exhaust and set of injectors don't sound two bad how much am I looking at

£1500-£2000

[Plodmonkey]

That's not to bad like

[Wobbly Dave]

Never heard of anyone making 350 out of a 19T - not out of a 2319cc engine anyway.

[p fandango]

Never heard of anyone making 350 out of a 19T - not out of a 2319cc engine anyway.
JT's will be over that easily once its run in

[Plodmonkey]

It shouldn't be that hard to get 350bhp from a 2.3ltr turbo

[Wobbly Dave]

It shouldn't be that hard to get 350bhp from a 2.3ltr turbo

There are very few I've seen do it. I think you'd need a modified 19T to get there. Out the box - I am not sure.

[Wobbly Dave]

JT's will be over that easily once its run in

JT's 19 is not standard is it?

[claymore]

And you would need some H beam rods to be on the safe side.

[T5frankie]

JT's will be over that easily once its run in

i'm surprised you can see where you're going you're head so far up his §§§§ lol

http://theartofhating.files.wordpress.com/2013/05/image1.png

[p fandango]

i'm surprised you can see where you're going you're head so far up his §§§§ lol
as our engine specs are going to be very similiar, & his has already proved what it can do i do use him as an example quite alot

[Plodmonkey]

Ha what other turbos like after market ones

[Wobbly Dave]

I think Pedro has skipped a few bits you might need as well - if the 19T can indeed go that hard. Like the rods for example & you'll probably need a larger intercooler too...

There are some Garrett alternatives you can put on. GT3071 seems quite popular

I've smuggled a GTX3071R on the back off mine. So far the most I made out of it was 355bhp at the wheels

It's not finished yet though.

[Plodmonkey]

355 would do me nice like

[WOODY T5]

Got 342 out of my 19t?

[LiamT4]

if your names dean, you don't need forged rods.....

[Plodmonkey]

Who is dean lol

[LiamT4]

Who is dean lol

fastest 1/4mile on the forum ;-)

[WOODY T5]

Hello

[Wobbly Dave]

Got 342 out of my 19t?

No doubt, as you well know I have the utmost respect for you & your 850 - but we were talking 350. It might seem petty to quibble over 8bhp.

Cracking 350 that isn't as simple as whacking a bigger turbo on the back & fueling it, as Pedro seems to be eluding to - at least with the 2319cc engine.

[WOODY T5]

if your names dean, you don't need forged rods.....yeah 2nd engine now still on chocolate rods lol must be that map I have :)

[WOODY T5]

No doubt, as you well know I have the utmost respect for you & your 850 - but we were talking 350. It might seem petty to quibble over 8bhp.

Cracking 350 that isn't as simple as whacking a bigger turbo on the back & fueling it, as Pedro seems to be eluding to - at least with the 2319cc engine.lol think bit more boost and rev it to 6800 rpm will see over 350 Dave

[p fandango]

Cracking 350 that isn't as simple as whacking a bigger turbo on the back & fueling it, as Pedro seems to be eluding to - at least with the 2319cc engine.
i'm not "eluding" to anything, he asked what turbo is good for 350bhp & i replied with 19t because it can

[Wobbly Dave]

But not out the box and even if it can, it will be right at its far limit.

[p fandango]

But not out the box and even if it can, it will be right at its far limit.
no i even disagree with that. JT (sorry Frankie) has already got 323bhp out of his standard 19t from just 1.1bar, & that was before the intercooler & S60R manifold went on. Mapped to those mods, plus raise the boost to 1.3bar which he can in his class (& still not stressing the turbo) & your laughing

[Wobbly Dave]

I remain skeptical but willing to be proved wrong.

[Plodmonkey]

Well am gonig to try and get it over 350 it can be done easy as the sweedish seem to no something we don't no in the uk

[T5frankie]

I think Pedro has skipped a few bits you might need as well - if the 19T can indeed go that hard. Like the rods for example & you'll probably need a larger intercooler too...

There are some Garrett alternatives you can put on. GT3071 seems quite popular

I've smuggled a GTX3071R on the back off mine. So far the most I made out of it was 355bhp at the wheels

It's not finished yet though.

355 at the flywheel

[Wobbly Dave]

No at the wheels but it is not where I am now. the 355 was a blip - a surge but it still ran it! LOL

I showed you at North Weald. I still need some work on the mapping doing.

21818

[Plodmonkey]

That is one nice torque figger

[Wobbly Dave]

Just starting out