bottom arm parts

[PHIL V70R]

ok chaps just wondering if any ones nos ware i can buy the white steering stops that come as stranded when you bye new arms...had a look on flebay and found steering stops but these seem 2 go on Tyre size..and looks like the arm would have to be drilled out...cheers lads

[M-R-P]

It's rivited to the arm on a P1 (iirc) so it'll only be a quick drill then new rivets.

[stribo]

I believe Parts For Volvos do them.

EDIT

Try here
http://www.partsforvolvosonline.com/product_info.php?cPath=2_1127&products_id=5083

[M-R-P]

I believe Parts For Volvos do them.

EDIT

Try here
http://www.partsforvolvosonline.com/product_info.php?cPath=2_1127&products_id=5083
Wrong model dude ;)

Phil's is the same shape as graham's.

[stribo]

My bad

http://www.partsforvolvosonline.com/product_info.php?cPath=2_1127&products_id=7893

[M-R-P]

My bad

http://www.partsforvolvosonline.com/product_info.php?cPath=2_1127&products_id=7893

That's the puppies ;)

Looks like I was right about the rivet thing too :D

[stribo]

Yeah, my C70 ones are riveted on.

[M-R-P]

That's where the extra weight comes from with the P2 - everything's bolted on instead of riveted/glued/taped etc ;)

[stribo]

That's the Ford influence. ;)

[PHIL V70R]

cheers lads parts have been ordered....

[LeeT5]

That's where the extra weight comes from with the P2 - everything's bolted on instead of riveted/glued/taped etc ;)

...Anything glued, riveted or taped falls off!! I'll stick to bolts thanks. :haha: