PDA

View Full Version : Project Rapid Workhorse



danny-R
Friday 15th February 2013, 17:26
I've got my new T5 home and I'm over the moon with it for the price I paid. Having said that it does need a few things doing to it.
My ecu is out and getting read to see if it's had anything done to it, I don't think it has but still worth a look.
Things to do before I start driving and modifying it, bearing in mind it will be 2 months before I get my pot off:

Checked the codes and there's an o2 sensor fault so will probably need a lambda sensor.
Good clean inside and out which I will tackle myself tomorrow on crutches
There's oil coming from what looks like to be the pcv (please see engine pic below, any ideas?)
Oil and filter change then plugs and possibly leads.
Mot, it expired on the 8th of this month and never realised till it was home and Done a check on the DVLA (seller said it had a few months left)

Then once these are done I should have my pot off and be able to drive it and get back to work and start earning some pennies in it, then:

Definatley needs lowering atleast 40mm
Source A nice dark leather interior with door cards and maybe a new centre console as it's scratched to death.
Needs a passenger side sun visor as it's had some sort of police device fitted to it.
Power wise i'd like over 300bhp so will probably be a 3" downpipe with race cat and 2.5 inch system when funds allow and a remap to suit.

Once I have done the above I will have a very unassuming and rapid workhorse :)
Now for some pre-clean pictures

http://i573.photobucket.com/albums/ss179/longdogger/20130215_142846_zps1a31acbb.jpg
White car with EDL on the reg, Ironic and slightly rascist don't you think
http://i573.photobucket.com/albums/ss179/longdogger/20130215_152549_zpsc8166e2c.jpg
http://i573.photobucket.com/albums/ss179/longdogger/20130215_152749_zpsffb920ab.jpg
http://i573.photobucket.com/albums/ss179/longdogger/20130215_152722_zpsc042e4c6.jpg

Don't know if you'll be able to make out the oil in this picture?
http://i573.photobucket.com/albums/ss179/longdogger/20130215_142753_zps1b5d6c4b.jpg

Thanks for looking, any comments or advice welcomed.
Looks like I will definatley be attending york now but doubt it will be going down the strip lol

T5frankie
Friday 15th February 2013, 17:28
well done mate, course it will be going down the strip lol

danny-R
Friday 15th February 2013, 17:31
well done mate, course it will be going down the strip lol

Probably :) the last few times i've been I was only supposed to be spectating then when i'm there i can't help myself

hybriduno
Friday 15th February 2013, 17:31
nice :) id like one as a work horse once my projects done :)

t5 pete
Friday 15th February 2013, 17:32
Well done danny looks nice enough see you at york with it

danny-R
Friday 15th February 2013, 17:33
Why not, Get you're project sorted first though can't wait to see that thing go :)

V70 Graham
Friday 15th February 2013, 17:33
Well done, nice find and should clean up well, centre console and leather interior you should be able to pick up at a scrappy fairly cheaply.

danny-R
Friday 15th February 2013, 17:34
Well done danny looks nice enough see you at york with it

Yeah you certainly will pete. Will prob still be standard though. Atleast I won't need a tent if I camp ;)

danny-R
Friday 15th February 2013, 17:36
Well done, nice find and should clean up well, centre console and leather interior you should be able to pick up at a scrappy fairly cheaply.

It needs leather, the interior lets it down tbh. There's a few full interiors on ebay you prob don't know but will an earlier pre04 interior fit and will the plugs be there for electric heated seats do you think?

V70 Graham
Friday 15th February 2013, 17:39
It needs leather, the interior lets it down tbh. There's a few full interiors on ebay you prob don't know but will an earlier pre04 interior fit and will the plugs be there for electric heated seats do you think?

Your dead right there, I'm sure when M-R-P sees this he'll answer your questions, he's the ex-plod P2 Guy lol

Kingsford G
Friday 15th February 2013, 18:21
Nice.2.4 t5 remapped I believe jumps over 300bhp with k24 turbo.U can get leather seats for £100 max

danny-R
Friday 15th February 2013, 18:34
I'm already on the lookout for an interior but not too sure if the plugs will be the same from an earlier p2.
I've just been out hopping about with hoover getting all the dog hair out of the boot, will tackle the rest of the inside and give it a good clean tomorrow.

Kingsford G
Friday 15th February 2013, 18:38
U have a new toy looking to yr right foot now lol

danny-R
Friday 15th February 2013, 18:41
Just a shame i can't drive it lol. I was getting excellent quotes from CK for an 850 but the cheapest I've been quoted on this is 900 tpft.

M-R-P
Friday 15th February 2013, 19:09
Older, pre-04 seats won't work, unless you want to do some splicing with the airbag wires. They use a different plug.
I paid 55 quid for my interior so be patient and wait for the right one to come along.
Stick standard shocks on the back to bring it down a bit. You'll need to ditch nivomats before you lower it any way. (I got 130 quid for mo old springs and nivomats with 197k on them) that'll help pay for mods.

Any help you need mate, I'm always around somewhere ;)

WOODY T5
Friday 15th February 2013, 19:09
look very nice dan well done bargain to:-)

Biff
Friday 15th February 2013, 19:13
Nice one mate, I bought mine to help me with my job. I've had a list of jobs to do & next Wednesday I may be driving to hamburg. Massive test. Lol Looks a tidy motor you got there.

danny-R
Friday 15th February 2013, 19:21
Older, pre-04 seats won't work, unless you want to do some splicing with the airbag wires. They use a different plug.
I paid 55 quid for my interior so be patient and wait for the right one to come along.
Stick standard shocks on the back to bring it down a bit. You'll need to ditch nivomats before you lower it any way. (I got 130 quid for mo old springs and nivomats with 197k on them) that'll help pay for mods.

Any help you need mate, I'm always around somewhere ;)

So I will need springs and rear shocks to lower it, can they be from an earlier p2? I have a feeling you will be getting a million and one questions from me lol
so i apologize in advance :)

danny-R
Friday 15th February 2013, 19:22
look very nice dan well done bargain to:-)

Cheers dean definatley a bargain, It seems a decent car just cant wait to drive it :)

Jamest5r
Friday 15th February 2013, 19:25
Welcome back to the club Danny :) and of course you will on the strip at York.

danny-R
Friday 15th February 2013, 19:29
Nice one mate, I bought mine to help me with my job. I've had a list of jobs to do & next Wednesday I may be driving to hamburg. Massive test. Lol Looks a tidy motor you got there.

These P2's are in a total different leauge to my previous 850's, so quiet and smooth. I could happily drive long distance in it. I was a passenger in it today on the way home and the driver gave it a bit to me it looked like it was doing 100 in 3rd. (down my private driveway of course) ;0)

danny-R
Friday 15th February 2013, 19:30
Welcome back to the club Danny :) and of course you will on the strip at York.

I never left mate, Just because I was volvo-less doesn't mean I wasn't lurking in the background somewhere lol and yes my friend, see you at york ;)

Biff
Friday 15th February 2013, 20:13
Sound mate, I've never been in a ph2 bar sitting in the back of a local traffic car back in my boy racing days. Lol
Getting about my day will certainly be more interesting now. Lol

Nealevo
Friday 15th February 2013, 20:20
Looking good mate, nice base for a project, see you on the strip, if I get there!

danny-R
Friday 15th February 2013, 20:22
Are you doing your manual conversion before york? You better pull your finger out ;)

LiamT4
Friday 15th February 2013, 20:24
Another xc70 t5 lol (Been missing the 4x4 jokes since martin lowered his)

Seriously though, looks good and plenty of power for not much money.

danny-R
Friday 15th February 2013, 20:29
Another xc70 t5 lol (Been missing the 4x4 jokes since martin lowered his)

Seriously though, looks good and plenty of power for not much money.

Don't start lol :) I know it needs lowering dont remind me

LiamT4
Friday 15th February 2013, 20:39
Don't start lol :) I know it needs lowering dont remind me

I'm sorry, but i will be reminding you untill its been done............and i doubt i'll be the only one lol

Think a 2.4t5 will probably be my next volvo, but quite like an s40 t5 with the r-design stuff on it.

danny-R
Friday 15th February 2013, 21:04
I can't really recommend it yet as i've not had chance to drive it but on paper the 2.4 makes sense ;)
I'll just have to remain from uploading pics untill it's lowered lol

danny-R
Monday 18th February 2013, 13:15
Right I'm sat in the car giving it a clean I've lifted the front mats and the carpet is wet.
There's more on the drivers side than passenger. Does that normally mean the heater matrix is goosed?

MRTREE
Monday 18th February 2013, 13:47
How dod you find it in its plod colours? i really wanna find mine but its older so will probably not be able 2

danny-R
Monday 18th February 2013, 13:58
Well, I searched google for hours and nothing came up then I started this thread http://www.vpcuk.org/forums/showthread.php?48992-Help-find-my-ex-plodder-in-action&highlight=yk05 It was Bomb192uk that found it for me and I still don't know how lol. Message me your reg and i'll gladly have a browse for you, Nothing else to do with my time :)

danny-R
Monday 18th February 2013, 14:03
http://i573.photobucket.com/albums/ss179/longdogger/20130218_121447_zps3fa7de6f.jpg
Passenger side wet patch, any ideas?
Scrubbed up pretty well I think, still needs a good machine polish but will have to wait till I can drive it.
http://i573.photobucket.com/albums/ss179/longdogger/20130218_124001_zps395aa735.jpg
http://i573.photobucket.com/albums/ss179/longdogger/20130218_124016_zps372a629e.jpg
http://i573.photobucket.com/albums/ss179/longdogger/20130218_124059_zps63b12beb.jpg
http://i573.photobucket.com/albums/ss179/longdogger/20130218_124117_zps15653006.jpg
That's it for now :)

MRTREE
Monday 18th February 2013, 14:07
My Reg Is KF02 UXL I believe it may be hampshire or possibly luton/Bedfordshire. its scrubbed well there mate looking good and the wet patch is usually i sign of heater matrix fail are the blowers working corrrectly and the right heat? im extremly jelous hahahaha i want this shape and i saw what the ghuy had it up for thats an absolute bargain!

pay day this weekend so im going to get stuck in with mine! :D

danny-R
Monday 18th February 2013, 14:13
My Reg Is KF02 UXL I believe it may be hampshire or possibly luton/Bedfordshire. its scrubbed well there mate looking good and the wet patch is usually i sign of heater matrix fail are the blowers working corrrectly and the right heat? im extremly jelous hahahaha i want this shape and i saw what the ghuy had it up for thats an absolute bargain!

pay day this weekend so im going to get stuck in with mine! :D

He had the wrong number on the advert and no exaggeration I must have emailed atleast 20 times, he evn dropped the price from 1400 as he thought nobody was interested. Numpty ;) I seen one go for 1100 the week before last aswell that looked decent same year.
As for the heaters working I never checked they blew hot on the drive home but the aircon works. I'm looking at least a month before I can go out in it and check.

danny-R
Monday 18th February 2013, 14:16
Is yours a V70?

MRTREE
Monday 18th February 2013, 14:17
He had the wrong number on the advert and no exaggeration I must have emailed atleast 20 times, he evn dropped the price from 1400 as he thought nobody was interested. Numpty ;) I seen one go for 1100 the week before last aswell that looked decent same year.
As for the heaters working I never checked they blew hot on the drive home but the aircon works. I'm looking at least a month before I can go out in it and check.

Get it started up on your drive let it warm up to full temp and check if it needs doing then nows the time to do it as your not using it at the moment, im keeping my eye out for one its just funds plus i have 2 volvos already and the misses keeps hassling me for a crappy french SH*TE Convertable which im defo not going to give in lol

MRTREE
Monday 18th February 2013, 14:18
Is yours a V70?

Yeah Mate

danny-R
Monday 18th February 2013, 14:24
I'll try that this afternoon, i've found pics of yours but from a gumtree advert probably from when you bought it
https://www.google.co.uk/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&docid=1ReSfmFcSTxuCM&tbnid=K9I-Xx_Bg0eICM:&ved=0CAMQjhw&url=http%3A%2F%2Fwww.gumtree.com%2Fp%2Fcars-vans-motorbikes%2F2002-volvo-v70-t5-ex-police-police-car-taxed-and-tested-bargain-manchester-1300%2F1005033030&ei=EyoiUfPrKueR0QWdj4HYBA&bvm=bv.42553238,d.d2k&psig=AFQjCNHvtgWCkCX4__7bCTb3_BdOBX2mZA&ust=1361279671626714

MRTREE
Monday 18th February 2013, 14:33
I'll try that this afternoon, i've found pics of yours but from a gumtree advert probably from when you bought it
https://www.google.co.uk/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&docid=1ReSfmFcSTxuCM&tbnid=K9I-Xx_Bg0eICM:&ved=0CAMQjhw&url=http%3A%2F%2Fwww.gumtree.com%2Fp%2Fcars-vans-motorbikes%2F2002-volvo-v70-t5-ex-police-police-car-taxed-and-tested-bargain-manchester-1300%2F1005033030&ei=EyoiUfPrKueR0QWdj4HYBA&bvm=bv.42553238,d.d2k&psig=AFQjCNHvtgWCkCX4__7bCTb3_BdOBX2mZA&ust=1361279671626714


Hmmm i havnt seen that before it must of been the guy i got it from got it from there that says manchester i got it from bedford and i swapped my 850 for it which cost me peanuts lol so ongoing project ;)

danny-R
Monday 18th February 2013, 14:55
http://www.flickr.com/photos/33256097@N03/5240056851/ Going by the reg on this i'd say it was a bedfordshire arv, I'm still looking

MRTREE
Monday 18th February 2013, 15:09
http://www.flickr.com/photos/33256097@N03/5240056851/ Going by the reg on this i'd say it was a bedfordshire arv, I'm still looking

ill have to look at that later is that a pic of mine? im at work and it blocks certain sites lol

danny-R
Monday 18th February 2013, 15:12
No mate it's a "KF02 UYT Bedfordshire Police Vauxhall Brava pick up truck & hood" I just put it up to show you as it starts the same as yours so yours must be from bedfordshire. I'm still looking

leet5r
Monday 18th February 2013, 15:18
looking good barrymore lad , a take it ya got the tar and glue remover then , looks a different car from when i seen it on sunday lol

MRTREE
Monday 18th February 2013, 15:19
No mate it's a "KF02 UYT Bedfordshire Police Vauxhall Brava pick up truck & hood" I just put it up to show you as it starts the same as yours so yours must be from bedfordshire. I'm still looking

Yeah Makes sense thanks mate keep me updated

danny-R
Monday 18th February 2013, 15:49
looking good barrymore lad , a take it ya got the tar and glue remover then , looks a different car from when i seen it on sunday lol

Cheers Mr fritzle :) Nah still no tar and glue remover I should be getting it this week and giving it a good polish. Gonna try get hold of a lambda sensor as EML light has came on with code P2231

danny-R
Monday 18th February 2013, 15:51
I've just sat in it, had it up to temperature and the heaters were blowing hot (ish). Not as hot as I think they should be. If the heater matrix was leaking would they blow hot at all?
Cheers

MRTREE
Monday 18th February 2013, 15:58
I've just sat in it, had it up to temperature and the heaters were blowing hot (ish). Not as hot as I think they should be. If the heater matrix was leaking would they blow hot at all?
Cheers

They would blow warmish as its coming from the engine bay but if its not hot then it seems to be the matrix

danny-R
Monday 18th February 2013, 16:14
I'm not too sure tbh my old 850's used to blow hot air in minutes and this wasn't blowing as hot but it was just at idle and might get hotter on a run so I suppose it will have to wait and see for now, if it's a dash out job i'll do it the same time as the interior (when i find one).
Right now i'm going to shop about for a lambda to get the light off

MRTREE
Monday 18th February 2013, 16:51
I'm not too sure tbh my old 850's used to blow hot air in minutes and this wasn't blowing as hot but it was just at idle and might get hotter on a run so I suppose it will have to wait and see for now, if it's a dash out job i'll do it the same time as the interior (when i find one).
Right now i'm going to shop about for a lambda to get the light off


You do right mate

danny-R
Monday 18th February 2013, 17:39
Testing, my first ever attempt at making a banner

haha failed

T5frankie
Monday 18th February 2013, 17:40
good effort lol

danny-R
Monday 18th February 2013, 17:43
Why thank you :uglyhamme How hard can it be, it says copy and paste lol

danny-R
Tuesday 19th February 2013, 14:21
Extremely bored so I've been attacking the car with a bottle of tar and glue remover and wheel acid. Just doing one wheel and panel at a time as its a nightmare hopping about here's a little before and after
http://i573.photobucket.com/albums/ss179/longdogger/20130219_120712_zps72ca22fa.jpg
Quick coat of super resin after the tar and glue remover and I'm pleased with the results. Will have to do till leet5r machine polishes it for me
http://i573.photobucket.com/albums/ss179/longdogger/20130219_124826_zps5806ac3c.jpg

danny-R
Sunday 24th February 2013, 10:54
http://i573.photobucket.com/albums/ss179/longdogger/20130224_092348_zpsf43a8fe0.jpg
Looks loads better with black grill. I know it's still like an xc70 lol

V70 Graham
Sunday 24th February 2013, 12:02
Looks loads better with black grill. I know it's still like an xc70 lol

It is coming along, maybe M-R-P will lend you the steps he used to get into his car when it was that high :lol:

volvokid
Sunday 24th February 2013, 12:05
That grill transforms it

volvokid
Sunday 24th February 2013, 12:07
You would have been better investing in some tardis and ironx for the decontaminating you really would have seen both products working on the white car and you wouldn't have the pain you do in your arms ;)

danny-R
Sunday 24th February 2013, 13:45
That grill transforms it
I think so too. I'll look into them my mate is a valet so I don't pay for my cleaning products.
Got two Bridgestone in the boot now I just need a lambda then it's ready for Mot.

volvokid
Sunday 24th February 2013, 13:47
Iron x will turn your pink as it lifts all the metal filaments from your paint

danny-R
Monday 11th March 2013, 16:49
I've booked it in for an MoT on Saturday so I need to pull my finger out and source and fit the correct lambda sensor. I just hope I can drive it, won't find out until Thursday. Fingers crossed

danny-R
Friday 15th March 2013, 10:33
All insured, Just need an MOT now. Fingers crossed for tomorrow

smithy
Friday 15th March 2013, 14:25
All insured, Just need an MOT now. Fingers crossed for tomorrow

Goodluck mate

danny-R
Friday 15th March 2013, 14:56
I had it looked over before I bought it, and my mate drove it home. He said it drives straight etc and the brakes are sharp so other than the lambda fault I can't see it failing on anything other than emissions but Fingers crossed anyway

danny-R
Saturday 16th March 2013, 10:54
I'm getting ready to set off for Mot, it's not till 12.30 but it's the first time I've drove in 2 months and it's about 20 miles away lol so it might take me a while

WOODY T5
Saturday 16th March 2013, 10:56
Good look mate hope she gets a pass

iancho
Saturday 16th March 2013, 10:56
Enjoy the experience mate... Hope all goes well at 12.30 keep us informed!

danny-R
Saturday 16th March 2013, 11:06
I'll update with the results asap, only thing i'm worried about is emissions but tbh he is a good friend if you know what i mean ;)

iancho
Saturday 16th March 2013, 11:12
I'll update with the results asap, only thing i'm worried about is emissions but tbh he is a good friend if you know what i mean ;)

Yeah we all need friends like that :)

danny-R
Saturday 16th March 2013, 12:21
I'm halfway to the test center just stopped for a fry up. Been a good drive so far especially when I gave it a squirt exiting a round about and left the tailgating s type behind

leet5r
Saturday 16th March 2013, 12:28
looks like the pot has done ya foot an improvement lol

danny-R
Saturday 16th March 2013, 12:33
Don't drive with it on you tool haha

graemewelch
Saturday 16th March 2013, 13:18
hope it passes. when it dose ive got sumit shinney waiting for you.

danny-R
Saturday 16th March 2013, 14:12
Still sat waiting. There's a bit of a backlog and still need a tyre changing. Cheers Graeme but its gonna be a few weeks yet till I get back to work.

danny-R
Saturday 16th March 2013, 14:22
http://i573.photobucket.com/albums/ss179/longdogger/20130316_131337_zps08bc9086.jpg
Fingers crossed

danny-R
Saturday 16th March 2013, 14:42
Pass ;)

WOODY T5
Saturday 16th March 2013, 15:20
Great news mate

graemewelch
Saturday 16th March 2013, 15:21
nice one.

danny-R
Saturday 16th March 2013, 15:38
It's getting treat to a hand job from the polish hand job place haha

Jamest5r
Saturday 16th March 2013, 16:07
Got to love a polish hand job :)

munster732
Saturday 16th March 2013, 16:15
Got to love a polish hand job :)

polish hand job??? I find the black Kiwi stuff stains on me Calvins are murder to get out :o

Other than that I find there are plenty of persons of indigenous poulations that will do favours for small change round here.

Congrats on the piece of A4 paper, great result!

danny-R
Saturday 16th March 2013, 16:31
I'm back home now, it's been great driving after such a long time. I have done over 60 miles and averaged 32mpg driving like a saint though.
I had reset the codes using the Torque app and the eml has stayed off, also using the torque app I checked what it would boost to and does 12psi in 3rd sound about right? Overall I'm actually buzzing to be back in a volvo :) Cheers guys

danny-R
Saturday 16th March 2013, 16:48
polish hand job??? I find the black Kiwi stuff stains on me Calvins are murder to get out :o

Other than that I find there are plenty of persons of indigenous poulations that will do favours for small change round here.

Congrats on the piece of A4 paper, great result!

East european car wash down the road lol

iancho
Saturday 16th March 2013, 17:05
Nice one mate, I'm glad it all went well :B_thumb:

danny-R
Saturday 16th March 2013, 17:08
Cheers :B_thumb:
Now to prepare myself for sleeping rough tonight.

leet5r
Saturday 16th March 2013, 17:37
well done m8 , did you give the tester a hand job lol

kfc
Saturday 16th March 2013, 17:38
bet thats a weight off your mind. glad your all happy again bud.

smithy
Saturday 16th March 2013, 17:45
bet thats a weight off your mind. glad your all happy again bud.

What the polish hand job lol well done mate glad she is on the road now enjoy

V70 Graham
Saturday 16th March 2013, 18:00
Great news, pleased for you mate.

danny-R
Wednesday 10th April 2013, 15:03
Been out in the Volvo today and it was running extra lumpy when I first started it so I read the codes and it looks like I have maf issues aswell as lambda sensor. Will have to wait till I get home to check what the bottom one is. Only a few more weeks to go then I can get back to work and get it sorted.
http://i573.photobucket.com/albums/ss179/longdogger/Screenshot_2013-04-10-13-12-27_zps642c0d7d.png

M-R-P
Wednesday 10th April 2013, 15:11
P0027 is exhaust VVT valve mate :(
The maf fault could be a loose air pipe either side of the turbo - check the jubilee clips.
2231 looks like knackered lambda wiring.

MRTREE
Wednesday 10th April 2013, 15:12
Been out in the Volvo today and it was running extra lumpy when I first started it so I read the codes and it looks like I have maf issues aswell as lambda sensor. Will have to wait till I get home to check what the bottom one is. Only a few more weeks to go then I can get back to work and get it sorted.
http://i573.photobucket.com/albums/ss179/longdogger/Screenshot_2013-04-10-13-12-27_zps642c0d7d.png

Is that a phone app?

danny-R
Wednesday 10th April 2013, 16:38
Vvt valve don't sound good lol and yes Mr tree it's called torque. It costs about 3 quid but I know a way to get it for free. Measures afrs boost etc etc aswell as reading deleting faults

MRTREE
Wednesday 10th April 2013, 16:41
Vvt valve don't sound good lol and yes Mr tree it's called torque. It costs about 3 quid but I know a way to get it for free. Measures afrs boost etc etc aswell as reading deleting faults

Is it available on Iphone? and how does it read it do you need a cable?

danny-R
Wednesday 10th April 2013, 16:56
Yeah I think so you will need the full paid version plus an obd bluetooth dongle adapter thing I'll put the link up for one when I get home. Bout a tenner on fleabay

danny-R
Wednesday 10th April 2013, 18:19
http://www.ebay.co.uk/itm/Google-Android-Torque-Adapter-Bluetooth-Car-OBD2-OBDII-Diagnostic-Interface-HTC-/230946828691?pt=UK_Diagnostic_Tools_Equipment&hash=item35c580f193 Bluetooth obd dongle.

Since I don't have much money to spend on the Volvo at the minute I'm just sorting little bits and bobs that are free/don't cost much.
I removed the sound deadening from under the bonnet and looked all over for an cone filter, thought I had one lying about somewhere.
Tonight's mission is have a go at fixing both of my flick keys as they don't flick anymore, found his video on youpube


http://www.youtube.com/watch?v=i-IJP1KhGWE

MRTREE
Thursday 11th April 2013, 09:37
http://www.ebay.co.uk/itm/Google-Android-Torque-Adapter-Bluetooth-Car-OBD2-OBDII-Diagnostic-Interface-HTC-/230946828691?pt=UK_Diagnostic_Tools_Equipment&hash=item35c580f193 Bluetooth obd dongle.

Since I don't have much money to spend on the Volvo at the minute I'm just sorting little bits and bobs that are free/don't cost much.
I removed the sound deadening from under the bonnet and looked all over for an cone filter, thought I had one lying about somewhere.
Tonight's mission is have a go at fixing both of my flick keys as they don't flick anymore, found his video on youpube


http://www.youtube.com/watch?v=i-IJP1KhGWE

Mine doesnt flick anymore and its a pain to sort, ill trade you my cone for your standard? lol i dont like mine!

danny-R
Sunday 14th April 2013, 18:08
Just noticed this reply. I think I'll have to keep the standard box incase it ever goes back to standard and tbh I'm not sure if they're the same on the facelift ones. I had a go at fitting a cone today inside the bottom half of the box and it wouldn't fit so will have another go when I get A bit of 3inch ish pipe to make it fit lol.
Been up to see leet5r today and he noticed a pipe was off after the maf sensor which explains the maf fault code. Reset the codes and the Eml stayed off for ages but came back on after I restarted the car so my 02 sensor is definitely goosed. That can wait till I do the exhaust as it looks a right pita to get to

danny-R
Sunday 14th April 2013, 18:58
Lee's builders bum
http://i573.photobucket.com/albums/ss179/longdogger/20130414_1429300_zps16a2a4fb.jpg

danny-R
Sunday 14th April 2013, 20:48
Doh. Phone repost

danny-R
Saturday 27th April 2013, 21:46
Powered by Vimto :)
http://i573.photobucket.com/albums/ss179/longdogger/20130427_192157_zps60494618.jpg (http://s573.photobucket.com/user/longdogger/media/20130427_192157_zps60494618.jpg.html)

leet5r
Saturday 27th April 2013, 21:51
so ya got the filter on then bud , vimto looks well too lol

danny-R
Saturday 27th April 2013, 21:53
Yeah managed to get it to fit, my mate had a few bits lying about in his cave along with gallons of odd bottles of magnatec lol Sounds awesome now just needs some more booost

AndysR
Sunday 28th April 2013, 21:32
Should try running it on Coke Cola the amount of sugar in that will have it bouncing off the walls! lol

danny-R
Friday 3rd May 2013, 21:08
Bit of an update, I'm slowly getting back on my feet (literally) so can start spending a few quid on the volvo. I've done an oil and filter change on her today and ordered a set of non nivomat shocks that will hopefully drop the back end down a little.

anybody need a set of nivomats lol?

Next on the list is a maf meter and lambda sensor and then to start squeezing more power from her :)

Whilst I'm here does anybody know where the fuse will be for my cigarette lighters?

cheers

danny-R
Thursday 9th May 2013, 13:54
Standard shocks have arrived, will try and get them fitted today and report back. I hope the back end drops a bit by ditching the nivomats

M-R-P
Thursday 9th May 2013, 15:46
Standard shocks have arrived, will try and get them fitted today and report back. I hope the back end drops a bit by ditching the nivomats

With the 35mm springs and OE shocks, mine dropped by about 70-75mm! You should do fine.

It'll be a bit boaty with the Niv spec springs tho.

danny-R
Thursday 9th May 2013, 16:13
I only plan to leave the niv springs on until I sell my shocks and buy lowering springs. It already feels like the qe2 after driving Lee's 850r the other day

M-R-P
Thursday 9th May 2013, 16:15
I only plan to leave the niv springs on until I sell my shocks and buy lowering springs. It already feels like the qe2 after driving Lee's 850r the other day

1732Kg says it'll never feel like an 850 lol

Reinforced chassis ;)

danny-R
Thursday 9th May 2013, 19:12
Got them fitted and instantly it's 20mm lower, will see how it settles on the drive home

M-R-P
Thursday 9th May 2013, 19:20
Sweet - should level it off a fair bit.

danny-R
Thursday 9th May 2013, 19:23
Might upload a picture when I get home if it's still light

danny-R
Friday 10th May 2013, 09:58
Before
http://i573.photobucket.com/albums/ss179/longdogger/20130509_182929_zps55b28b1e.jpg
During
http://i573.photobucket.com/albums/ss179/longdogger/20130509_185028_zps672156e7.jpg
After
http://i573.photobucket.com/albums/ss179/longdogger/20130510_084738_zps8e2b11bc.jpg

I make it nearlly 40 mm which I'm happy with till I get some springs. Will wash it this afternoon and put a before and after pic on for comparison

V70 Graham
Friday 10th May 2013, 10:29
That during pic looked like M-R-P's car did before he lowered his.....he didn't need the jack to get the back that high though !

danny-R
Tuesday 11th June 2013, 15:57
Bit of an update. Bought and fitted a lambda which was a bosch one and all is good on that front but I also bought a cheap maf which turns out to be the wrong part for the car so I'm having it swapped for the correct one tomorrow, fingers crossed.

M-R-P
Tuesday 11th June 2013, 16:04
Nice to see things taking shape mate.

BTW - the fuse for the fag lighter is in the fuse box on the end of the dash (drivers side).

Rear (boot) 12V outlet fuse is in the fuseboard behind the n/s boot panel :D

danny-R
Tuesday 11th June 2013, 16:07
Nice to see things taking shape mate.

BTW - the fuse for the fag lighter is in the fuse box on the end of the dash (drivers side).

Rear (boot) 12V outlet fuse is in the fuseboard behind the n/s boot panel :D

Sorted the fuses in time for York mate, both under the dash near peddles and both them little mini fuses. Might just have some lowering springs lined up for the weekend

M-R-P
Tuesday 11th June 2013, 16:15
Sorted the fuses in time for York mate, both under the dash near peddles and both them little mini fuses. Might just have some lowering springs lined up for the weekend
Yeah baby! now we're talkin' :D

What you got? beware the Apex ones - they're a bit low lol

M-R-P
Tuesday 11th June 2013, 16:16
Hang on - fuses under the dash near the pedals? hmmm... must be a P2.5 thing?

Although that's where they are on my little red source of all evil ;)

danny-R
Tuesday 11th June 2013, 16:21
Hang on - fuses under the dash near the pedals? hmmm... must be a P2.5 thing?

Although that's where they are on my little red source of all evil ;)

Tell me about it, it had my head baffled for weeks. I've counted 4 fuseboards already.
Under the dash
End panel on dash
the boot
under the bonnet

danny-R
Tuesday 11th June 2013, 16:23
Yeah baby! now we're talkin' :D

What you got? beware the Apex ones - they're a bit low lol

Not sure for definite yet, I was thinking these http://www.ebay.co.uk/itm/Lesjofors-Full-Lowering-Coil-Springs-Kit-Set-Variant2-Upgrade-Suspension-/360501247051?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AVolvo%7CModel%3AV70&hash=item53ef8c7c4b but they're only 30mm and I want 40 ;)

M-R-P
Tuesday 11th June 2013, 16:28
I think PFV sell those - don't know how much they are tho.

It depends what you want to do with them. I believe they're a bit soft (from the few comments I've seen/heard)
My Apex springs were supposed to be 30mm but it dropped a lot more than that and I now struggle getting over speed bumps and onto driveways. Might be better with 18" wheels tho.

danny-R
Tuesday 11th June 2013, 16:59
I will prob get some coilovers when funds allow, these are the pfv ones they say not for nivomat cars, will the go straight on mine?

M-R-P
Tuesday 11th June 2013, 17:08
Yeah, that just means you can't use them with nivomat shocks as the shocks will jack the car up to where it was before - as I found out :(

Plodmonkey
Tuesday 11th June 2013, 17:16
Bit of an update. Bought and fitted a lambda which was a bosch one and all is good on that front but I also bought a cheap maf which turns out to be the wrong part for the car so I'm having it swapped for the correct one tomorrow, fingers crossed.

We're you get the cheap maf as I'm after one mate

danny-R
Tuesday 11th June 2013, 17:27
We're you get the cheap maf as I'm after one mate

My local parts supplier, £64 ish but i'm starting to wish I bought a bosch one already

danny-R
Tuesday 11th June 2013, 17:28
Yeah, that just means you can't use them with nivomat shocks as the shocks will jack the car up to where it was before - as I found out :(

cheers

danny-R
Monday 17th June 2013, 14:16
40mm lowering springs ordered :)

M-R-P
Monday 17th June 2013, 14:25
Not fond of your exhaust then? lol :)

danny-R
Monday 17th June 2013, 14:33
I'd get coilovers if I could afford them at the mo and slam it lol

M-R-P
Monday 17th June 2013, 15:16
How low do you want lol :)

http://i1100.photobucket.com/albums/g413/martinrpeachey/Snapbucket/7BAB9489-orig_zps3655aec8.jpg (http://s1100.photobucket.com/user/martinrpeachey/media/Snapbucket/7BAB9489-orig_zps3655aec8.jpg.html)

danny-R
Monday 17th June 2013, 16:15
Lower ;)

M-R-P
Monday 17th June 2013, 16:27
Oh dear lol

danny-R
Thursday 20th June 2013, 22:18
Managed to do the front springs tonight. Went to turn round and do the rears and lost all drive to the wheels had a quick look and the cv has popped out on driver side oh well never mind will crack on tomorrow and take a few pics once it's settled

Biff
Thursday 20th June 2013, 22:23
Flat out down a bumpy road. Lol

danny-R
Thursday 20th June 2013, 22:30
Nah as soon as it moved back about a foot I heard a noise and lost drive. It was raining and getting dark so I threw the towel in. Have to use the derv for work tomorrow now I'm wounded

M-R-P
Thursday 20th June 2013, 23:33
Hope the inner CV hasn't popped out mate, almost impossible to sort.

Something that cropps up a lot... If you're faffing about with the front suspension on a P2, take the hub bolt out and keep pushing the driveshaft back into the gearbox or the inner CV falls apart :(

danny-R
Thursday 20th June 2013, 23:35
Nightmare. Will it not just slot back in?

M-R-P
Thursday 20th June 2013, 23:38
Nope, it'll need rebuilding :(

I had hoped you'd seen some of the P2 threads where people either do what you did and regretted it or where people have pushed the driveshaft in and mentioned it in their threads.

Sorry dude, you have a right ball-ache ahead.:bricks:

danny-R
Thursday 20th June 2013, 23:42
Best start a "driveshaft wanted thread" lol ?

M-R-P
Thursday 20th June 2013, 23:48
I think Leedsfinest managed to rebuild his on his S60R (I think it was him, not 100% on that) but it failed after a while.

Bummer mate.

danny-R
Thursday 20th June 2013, 23:51
What a barsteward. Kicking myself for not reading how to threads now

M-R-P
Friday 21st June 2013, 00:05
What a barsteward. Kicking myself for not reading how to threads now

Heindsight is always 20/20 (at the Megadeth song goes). that's what the how to section is for.

Lives and learns mate.

graemewelch
Friday 21st June 2013, 10:09
Best start a "driveshaft wanted thread" lol ?



i rebuilt mine. theres a nack to it. i did chuck my toys out the pram a few times though

M-R-P
Friday 21st June 2013, 10:19
It's something I'd have a go at but luckily, I've managed to not do it. I came close a while ago, when I had my wishbones off, just about got away with it tho.

danny-R
Friday 21st June 2013, 10:34
Not had chance to have a go at it will have a bash after work. I doubt very much I'll be able to do it with my limited mechanical knowledge and very short temper lol I'll prob just end up replacing it. Would it have to be from a 6 speed box like mine?

M-R-P
Friday 21st June 2013, 10:38
Think theyre universal mate but don't quote me on that...

danny-R
Friday 21st June 2013, 10:44
So I could use a diesel one? Or any p2 for that matter? Will have to go scrap yard mooching after work

M-R-P
Friday 21st June 2013, 11:03
Double - check first mate Contact PFV (other parts dealers are available) and see if the part numbers match.

graemewelch
Friday 21st June 2013, 11:40
try drivelink om team valley. i was quoted 65 for new shaft

danny-R
Friday 21st June 2013, 13:41
Looks like it's sorted managed to slot it back together and took it down the road and seems fine just need some cv boot straps. Just before I crack on with the rears could somebody be so kind and paste the link with the how to please I've had a browse on my phone and not much came up don't want to make another school boy error
Cherrs

M-R-P
Friday 21st June 2013, 14:37
There's a thread where a few of us have shared our experiences on the subject, It's been about recently too.

Basically you need to feed the spring compressor up inside the middle of the spring and jack the hub down to get it all out - it's a pig and those springs are BIG mate, and the hole it has to go through isn't very big.

danny-R
Friday 21st June 2013, 14:49
It's a bit of a ball ache this compared to the front how do you jack the hubs down lol

M-R-P
Friday 21st June 2013, 15:09
Personally, I undid the trailing arm but that seems to screw with the rear tracking a bit. I also snapped a bolt which took 2 hours to remove :(

Try this (http://www.vpcuk.org/forums/showthread.php?50894-How-to-fit-Lowering-springs-P2-T5&highlight=P2+lowering) it's the thread I was on about.

graemewelch
Friday 21st June 2013, 17:56
There's a thread where a few of us have shared our experiences on the subject, It's been about recently too.

Basically you need to feed the spring compressor up inside the middle of the spring and jack the hub down to get it all out - it's a pig and those springs are BIG mate, and the hole it has to go through isn't very big.

dosnt matter how small the hole is theres always a way to get it in

danny-R
Friday 21st June 2013, 18:27
Results. Still not had time to settle in will take a few better pics on my travels tomorrow.
http://i573.photobucket.com/albums/ss179/longdogger/20130621_175343_zps7fb2890f.jpg
http://i573.photobucket.com/albums/ss179/longdogger/20130621_175407_zpsf49c9d28.jpg

What do ya reckon?

Tomcat
Friday 21st June 2013, 18:53
As I've already said...beautifull Dan.

Plodmonkey
Friday 21st June 2013, 19:40
Looking really smart mate is that the PFv lowering kit

Jamest5r
Friday 21st June 2013, 19:47
Suits you better now mate :)

leet5r
Saturday 29th June 2013, 08:24
much better now bud , when you getting the wheels done

graemewelch
Saturday 29th June 2013, 08:35
looking good. now get the black trim on bumpers and sills painted. bet rs wheels would look good

danny-R
Saturday 29th June 2013, 09:17
Looking really smart mate is that the PFv lowering kit
Yes mate the 40mm ones

danny-R
Saturday 29th June 2013, 09:19
looking good. now get the black trim on bumpers and sills painted. bet rs wheels would look good

Will have to put that on my to-do list. Need to fix my drivers window mechanism today as I'm goin away working and it's currently wedged up with a bit of card lol

Plodmonkey
Saturday 29th June 2013, 17:40
Yes mate the 40mm ones

That shal be getting ordered

danny-R
Friday 30th August 2013, 19:34
2 months since I updated this thread. Basically the thing hasnt moved for that long the tyres have gone flat.
just sent the mrs out to take a pic of it looking sorry for itself.

http://i573.photobucket.com/albums/ss179/longdogger/received_m_mid1377886911465a5d595e26a7d7c7b48_0_zp s20a00560.jpg

it needs quite a few bits doing to get it back to a decent standard as soon as I get home it will be getting.
2 new tyres
Window regulator fixed. Dunno if you can see in the pic but its held up with paper.
ever so slight oil leak needs looking at. Hence the card board underneath.

I do have a set of discs and volvo pads and arb links sat there that need fitting.

So basically a days work and couple of hundred quid then I will see about getting it mapped and an exhaust fitted. Hopefully graeme will be back on his feet soon lol

leet5r
Monday 2nd September 2013, 22:16
ya mean back on his foot lol , sorry bad joke

danny-R
Thursday 5th September 2013, 12:38
Looks like the volvo will be getting reflashed today and the guy reckons about 60bhp gains best thing is its cost me nothing. Just skimming his kitchen ceiling as payment as we speak. Hopefully be done by the time im finished in a couple of hours. Watch this space

danny-R
Thursday 5th September 2013, 16:10
It worked. Feels faster and more responsive but still needs more boost lol will get it on a rr at some point to see what the gains are. 2nd isnt much different but 3rd and 4th have improved massively. Might try and do a 60 to 100 test later down my private driveway

V70 Graham
Thursday 5th September 2013, 17:12
Glad your happy, not a bad swap payment wise either.

graemewelch
Thursday 5th September 2013, 19:18
It worked. Feels faster and more responsive but still needs more boost lol will get it on a rr at some point to see what the gains are. 2nd isnt much different but 3rd and 4th have improved massively. Might try and do a 60 to 100 test later down my private driveway

that osnt sound right. mine was totaly different when mapped. could feel the difference in every gear

danny-R
Thursday 5th September 2013, 19:19
Probably not a patch on the likes of mte etc but its a definite improvement over standard. Just in time for the drive to trax. Its a bonus it only took me a couple of hours yet only took him about 20mins lol

danny-R
Thursday 5th September 2013, 19:21
that osnt sound right. mine was totaly different when mapped. could feel the difference in every gear

It does feel faster just not as fast as I expected. Will have a pop up yours one day and take you out see what you think. Infact what are you doing next sunday? Im going to summer madness up past your way. Tag along if you fancy getting out the house

graemewelch
Thursday 5th September 2013, 19:27
It does feel faster just not as fast as I expected. Will have a pop up yours one day and take you out see what you think. Infact what are you doing next sunday? Im going to summer madness up past your way. Tag along if you fancy getting out the house


im up for that, anything to get out the house. only time i get out these days is to look at stupid weding venues. mines sorned at minute or could of took mine for a blast to compare

danny-R
Thursday 5th September 2013, 19:46
I have no doubt yours will be a fair bit quicker lol. I'll give you a ring next week sometime to arrange a time etc. I know what its like being cooped up

graemewelch
Thursday 5th September 2013, 19:53
yours will be at the stage wear the cat is holding it back. mines running stanard cat at minute and i can feel it holding back. day out tomora. going to see me favourite nurse at rvi.

danny-R
Thursday 5th September 2013, 20:01
I think I will get that cat back you made and just keep it on the backburner till you can do me a dp and decat.
I think the rear lambda has been mapped out so no need for a spacer :)

graemewelch
Thursday 5th September 2013, 20:09
its a good that exhaust. itll work well with a decat. getting some flanges machined tonight. need to try and make some money again

danny-R
Thursday 5th September 2013, 20:16
What's the tailpipe like? Will it need it extending to fit the v70?

smithy
Thursday 5th September 2013, 21:06
I have no doubt yours will be a fair bit quicker lol. I'll give you a ring next week sometime to arrange a time etc. I know what its like being cooped up

Tighten the actuator abit mate because the car will not produce the goods with a loose actuator .

graemewelch
Thursday 5th September 2013, 21:10
What's the tailpipe like? Will it need it extending to fit the v70?


not sure about that, no issue if it dose though. im only down the road.

danny-R
Thursday 5th September 2013, 21:13
Tighten the actuator abit mate because the car will not produce the goods with a loose actuator .

Not a bad idea that. Would give it a go but don't know the difference between in and out lol

danny-R
Friday 6th September 2013, 15:37
Just purchased a 2.5 inch cat back system made for my car. Big thankyou to judgeninja for transporting it to trax for me. Just need a dp and decat now

Jamest5r
Friday 6th September 2013, 20:26
Just purchased a 2.5 inch cat back system made for my car. Big thankyou to judgeninja for transporting it to trax for me. Just need a dp and decat now

Got a dp and decat but come off an 850/p1 no idea if it would fit yours??

danny-R
Friday 6th September 2013, 20:29
Doubt it mate but if it does ill have it lol

Jamest5r
Friday 6th September 2013, 20:35
Some clever person will tell us numpties lol, anyway what time you hitting the road tomorrow?

mike 850
Friday 6th September 2013, 20:49
don't think so, for a start all 99+ cars have an angle flange on the turbo

smithy
Friday 6th September 2013, 20:56
Not a bad idea that. Would give it a go but don't know the difference between in and out lol

You make the actuator rod shorter to put more tention on the actuator spring .undo the nut and take the actuator arm off the wastgate .

danny-R
Friday 6th September 2013, 21:17
Some clever person will tell us numpties lol, anyway what time you hitting the road tomorrow?

Prob gonna set off about 4pm so expect to get there bout 7

Jamest5r
Friday 6th September 2013, 22:34
Prob gonna set off about 4pm so expect to get there bout 7

About the same time me and Mole will hit the M1 give us a bell :)

danny-R
Sunday 8th September 2013, 19:37
Just fitted my cat back system and I must say graeme has done a cracking job on it. Only this is because its made for an s60 its about 6 inches too short. The short drive home from having it fitted I was grinning from ear to ear it sounds awesome I just wish I could have had ot fitted earlier today when I was going round silverstone.

T5RatherAmusin
Sunday 8th September 2013, 19:43
We like pics Danny!

Also u don't take ur rod off, u just loosen nut and twist the. Adjustment screw

Nealevo
Sunday 8th September 2013, 19:46
Very impressed with your car today Danny, it's coming along nicely. Chasing the cars on the track made me chuckle, cops and robbers

graemewelch
Sunday 8th September 2013, 19:48
Just fitted my cat back system and I must say graeme has done a cracking job on it. Only this is because its made for an s60 its about 6 inches too short. The short drive home from having it fitted I was grinning from ear to ear it sounds awesome I just wish I could have had ot fitted earlier today when I was going round silverstone.

give me a shout when want to pop around and ill add the extra bit length to it for you. ive got some pipe so can do it when ever. i remember rightly it sounded nice. not to loud or drowny. i just decieded it was to loud for me once fitted a 3" down pipe. prob just me being a tart. am sure most would of loved it

danny-R
Sunday 8th September 2013, 19:49
We like pics Danny!

Also u don't take ur rod off, u just loosen nut and twist the. Adjustment screw

No pics but I did take a quick video. 2mins and ill upload it

danny-R
Sunday 8th September 2013, 19:51
Very impressed with your car today Danny, it's coming along nicely. Chasing the cars on the track made me chuckle, cops and robbers

Cheers mate its starting to grow on me now its getting to how I want it. It was awesome on the track will definitely do that again

danny-R
Sunday 8th September 2013, 19:52
give me a shout when want to pop around and ill add the extra bit length to it for you. ive got some pipe so can do it when ever. i remember rightly it sounded nice. not to loud or drowny. i just decieded it was to loud for me once fitted a 3" down pipe. prob just me being a tart. am sure most would of loved it

I dont mind leaving it as it is till you can sort me a dp and decat. The offer still stands for next week if you wanna tag along

graemewelch
Sunday 8th September 2013, 20:26
I dont mind leaving it as it is till you can sort me a dp and decat. The offer still stands for next week if you wanna tag along


ill def tag along. no wedding talk mind lol. ive got a few flanges that have been machined so can do you one when ever you want

danny-R
Sunday 8th September 2013, 20:30
Sweet. Let me know what it will cost me next week. Going to put it on youtube cos pb is crap

graemewelch
Sunday 8th September 2013, 20:39
ne probs. a decat wont be much. trying to track down suppliers bits as we speak. looking forward to the video. ive got a video clip of the same exhaust. be intresting to see if sounds the same

danny-R
Sunday 8th September 2013, 21:02
Wont let me upload it for some reason. Will have another go tomorrow

graemewelch
Sunday 8th September 2013, 21:11
you put it on photobucket. email me it if want

danny-R
Sunday 8th September 2013, 21:14
http://static.photobucket.com/player.swf?file=http://vid573.photobucket.com/albums/ss179/longdogger/20130908_192029_zps278455b1.mp4

danny-R
Sunday 8th September 2013, 21:17
Ffs its doing my head right in lol. Im off to bed will send it tomorrow bud. Pm me your email.

graemewelch
Sunday 8th September 2013, 21:29
sounds spot spot. nice deep burble without being intrusive.

leet5r
Sunday 8th September 2013, 22:20
what have I missed lol

graemewelch
Monday 9th September 2013, 14:05
http://i1240.photobucket.com/albums/gg483/gwexhausts/th_20120409_122030.jpg (http://i1240.photobucket.com/albums/gg483/gwexhausts/20120409_122030.mp4)

thisis what it was like when on my car

danny-R
Friday 13th September 2013, 20:30
Still cant view that video ^ will show you what it sounds like tomorrow. Had to get it extended a bit but looks and sounds lovely. Had to fit a new driveshaft because of my lead boots

http://i573.photobucket.com/albums/ss179/longdogger/20130910_115052_zpsd29f5b2c.jpg

graemewelch
Friday 13th September 2013, 20:34
looks at home there. wait till its decated and it pops and bangs. your right foot will get even heavier

danny-R
Friday 13th September 2013, 20:35
Already pops and bangs a bit :) its crying out for the dp and decat

Jamest5r
Friday 13th September 2013, 20:38
Lead boots?? nah thats all them bits of metal in your foot holding it together :)

Edit forgot im not talking to you lol

danny-R
Friday 13th September 2013, 21:49
Haha definitely the robo-foot nothing to do with the extra noise and power. Oh and sorry again ool

danny-R
Friday 20th September 2013, 19:22
Im sorry to say the volvo might be doing the journey. But fear not I have an 850 lined up ready

Jamest5r
Friday 20th September 2013, 20:06
Im sorry to say the volvo might be doing the journey. But fear not I have an 850 lined up ready

Come on tell then

danny-R
Friday 20th September 2013, 20:49
It's not lee's 850r which is a shame. Basically im swapping mine for a bm 325ci for the mrs then part exing her diseasle for an olive 850 with r bumper and bilsteins and a few other bits

Jamest5r
Friday 20th September 2013, 21:43
It's not lee's 850r which is a shame. Basically im swapping mine for a bm 325ci for the mrs then part exing her diseasle for an olive 850 with r bumper and bilsteins and a few other bits

Haha another olive knew you could'nt resist :)

Nealevo
Friday 20th September 2013, 21:53
Don't get a ghastly green bogey one!!! I'd rather have the explod

danny-R
Friday 20th September 2013, 22:03
The explod is faster than the olive. I showed him the volvos rear end the other day. Its running a rica 280 and mbc. He stayed side by side till top end of 3rd then I pulled away in 4th. On my private drag strip of course.
Don't get me wrong id love lees red 850 but its not meant to be. Plus the olive will remind me of my yoof :)

leet5r
Saturday 21st September 2013, 11:21
lol , am goin to see what its like with the 304map on bud , ya never know , a still fancy a little hot hatch

Tomcat
Saturday 21st September 2013, 11:36
looks at home there. wait till its decated and it pops and bangs. your right foot will get even heavier

Mines decated and it doesnt pop and bang at all...:(

graemewelch
Saturday 21st September 2013, 12:01
Mines decated and it doesnt pop and bang at all...:(

have you got straight through silencers