hey im new here ( :

[Iddo]

hey guys Im new here writing from Israel and I have a 95 850 T5 with some mods done to it

first thing I have done was 3 down pipe without cat and 2.5 free flow exhaust
after that i bought a 93 850 GLT manual non turbo as donor car and done the manual swap
few months after the manual swap my TD04 15G basically died lol so i bought some nice Greddy TD05 16G and believe me the car is a blast at 0.8 bar with no kind of ecu tuning!
I have a boost gauge and AEM A/F ratio gauge to be sure Im not running lean.

so this is the part where I need your help guys!
what is the best way to do a custom map with the Motronic 4.3 ?

I would really appreciate any idea you guys will have !

Iddo.

[M-R-P]

Welcome sir. Do you have any pictures?

An MBC should get you to 1 bar without a problem on a standard map.

[V70 Graham]

Welcome to the forum.

[merc85]

What sort of exhaust housing you runing with the 16g? i heard that all the td04 Compressor housing's mate up with the same exhaust housing is that the same for the 16g? the band clamp looks the same

[Iddo]

Welcome sir. Do you have any pictures?

An MBC should get you to 1 bar without a problem on a standard map.

standard map is good for standard turbo... but I got TD05 16G which is a bigger turbo so when I floor It I see my A/F ratio gauge goes up to 12.7 and thats to lean!
Im sure that with good tuning and bigger injectors I will get much better results...

20029

[merc85]

standard map is good for standard turbo... but I got TD05 16G which is a bigger turbo so when I floor It I see my A/F ratio gauge goes up to 12.7 and thats to lean!
Im sure that with good tuning and bigger injectors I will get much better results...

20029

That looks like alot of work to mod lol

[M-R-P]

There's a lot of work there to only be running 0.8 bar. I've fitted a MBC to a standard 1994 T5 and made over 1 bar before boost cut.

Nice pic, there's some good work in there.

[WOODY T5]

welcome mate nice ride

[t5 stealth]

welcome :)

[MRTREE]

Welcome