View Full Version : building a turbo
p fandango
Friday 24th February 2012, 21:23
i like the idea of the Mitsubishi 20g turbo upgrade. I've already got a 19t fitted & don't want to take that off to get the new blades fitted, then get re-fitted
having not messed with the turbo's before can a 16t be used & machined to get the 19t/20g wheels in or do they have bigger casings
will the angled exhaust outlet of a 16t fit the 3" angled downpipe i've already got on my 19t
final one. With my turbo being the pre-me7 can i use possibly an old 15g centre core with the coolant pipes arranged as mine are, with the 16t exhaust turbo side & the intended 16t/machined 20g inlet side
Volvostorm
Friday 24th February 2012, 21:33
Ask on Volvospeed, the 20g is popular over there :)
p fandango
Friday 24th February 2012, 21:34
Ask on Volvospeed, the 20g is popular over there :)
they all talk funny over there tho lol
Volvostorm
Friday 24th February 2012, 21:42
they all talk funny over there tho lol
I find it helps if you stick big macs in your ears! :eye-poppi
bubba_1986
Friday 24th February 2012, 21:42
just buy one ?
http://www.ebay.co.uk/itm/SUBARU-IMPREZA-WRX-STI-TD05H-20G-Turbo-/280488386370?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item414e691f42
they seem cheaper than the 19t
p fandango
Friday 24th February 2012, 21:47
just buy one ?
http://www.ebay.co.uk/itm/SUBARU-IMPREZA-WRX-STI-TD05H-20G-Turbo-/280488386370?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item414e691f42
they seem cheaper than the 19t
heard some bad reports about XS, plus all the flanges are wrong for us
M-R-P
Friday 24th February 2012, 21:47
BT got an MOT yet? ;)
Pmsl, if you keep fiddling with it, you'll go blind!
Volvostorm
Friday 24th February 2012, 21:48
BT got an MOT yet? ;)
Pmsl, if you keep fiddling with it, you'll go blind!
Or it will drop off! :P
p fandango
Friday 24th February 2012, 21:48
I find it helps if you stick big macs in your ears! :eye-poppi
even Google translator has a job with there language lol
bubba_1986
Friday 24th February 2012, 21:52
heard some bad reports about XS, plus all the flanges are wrong for us
Didn't even realize about the seller, was just looking at 20g turbo. Don't know anything about it. Is it the exhaust flange that is different ?. I have a 16t and never had it off or looked at one so i ain't got a clue about way flange sits.
You could always get a conversion piece made up
Is this turbo much better than 19t ?
p fandango
Friday 24th February 2012, 21:56
BT got an MOT yet? ;)
it's getting there ;)
Pmsl, if you keep fiddling with it, you'll go blind!
theirs always something to upgrade lol
p fandango
Friday 24th February 2012, 22:02
Didn't even realize about the seller, was just looking at 20g turbo. Don't know anything about it. Is it the exhaust flange that is different ?. I have a 16t and never had it off or looked at one so i ain't got a clue about way flange sits.
You could always get a conversion piece made up
Is this turbo much better than 19t ?
standard Volvo 19t
http://img706.imageshack.us/img706/4481/engine13.jpg
yes the exhaust is a normal circular exit on ours, sorry best pic i'd got
http://img20.imageshack.us/img20/7973/72529685.jpg
t5_monkey
Friday 24th February 2012, 22:30
20g owens development ported and polished oh yes yes yes :)
p fandango
Friday 24th February 2012, 22:38
20g owens development ported and polished oh yes yes yes :)
thats the plan (may not be done by Owens), but need to know if it can be based on a 16t as its hard to find a 19t these days
Jamest5r
Friday 24th February 2012, 23:48
i like the idea of the Mitsubishi 20g turbo upgrade. I've already got a 19t fitted & don't want to take that off to get the new blades fitted, then get re-fitted
having not messed with the turbo's before can a 16t be used & machined to get the 19t/20g wheels in or do they have bigger casings
will the angled exhaust outlet of a 16t fit the 3" angled downpipe i've already got on my 19t
final one. With my turbo being the pre-me7 can i use possibly an old 15g centre core with the coolant pipes arranged as mine are, with the 16t exhaust turbo side & the intended 16t/machined 20g inlet side
Just give your 19t to Turbo Technics along with about £300 and you will have what you want :)
p fandango
Saturday 25th February 2012, 05:19
Just give your 19t to Turbo Technics along with about £300 and you will have what you want :)
thats the basic plan, but don't want to take my 19t off. So will they be able to do the same work to a 16t or is some of the casings different/bigger?
bubba_1986
Saturday 25th February 2012, 12:45
thats the basic plan, but don't want to take my 19t off. So will they be able to do the same work to a 16t or is some of the casings different/bigger?
Yeah i want to know this aswell, was going to go down the route of 19t housing etc and get machined but this seems better. Anyone know where they are located ?
Jamest5r
Saturday 25th February 2012, 15:26
thats the basic plan, but don't want to take my 19t off. So will they be able to do the same work to a 16t or is some of the casings different/bigger?
18/19t's have 360 degree thrust bearing mate so easiest is to take your 19t off.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.