View Full Version : How to check for DTC's stored on the DIM.
s_cowen
Monday 9th January 2012, 00:37
If anyone wants to check if they have any DTC's stored on there DIM try this.
http://s60r.fadainc.com/tips/Diagnostics.pdf
Done mine earlier & I was shocked to find 7, I will have to get it plugged in soon to find out what they are & get my DRL's turned off at the same time,
I had faults stored on the
AUM,CEM,DDM,CCM,PDM,SWM,UEM.
This could be a good thing to do before buying a phase 2.:)
LeeT5
Wednesday 11th January 2012, 08:42
Interesting but why not use a code reader in the first place? I assume it doesn't actually tell you the fault code, just that you have a fault?
Al115
Wednesday 11th January 2012, 09:15
Nice if you don't have a code reader handy... I have to admit that I drive around with one in the boot of the car "just in case"!!! :)
Good find, thanks for sharing.
M-R-P
Wednesday 11th January 2012, 10:22
Just be grateful your DIM works at all lol ;)
Good find, I'm not sure if I want to check mine after all the hassle the bloody DIM has given me :(
LeeT5
Thursday 12th January 2012, 14:16
Just be grateful your DIM works at all lol ;)
Good find, I'm not sure if I want to check mine after all the hassle the bloody DIM has given me :(
Scaredy cat!! :haha:
M-R-P
Thursday 12th January 2012, 15:26
Scaredy cat!! :haha:
Just checked mine..... All good lol! (apart from the audio module - cos plod removed it!)
Al115
Thursday 12th January 2012, 16:15
Just in case anyone can't read the PDF, it says:
To show diagnostic information in the text window:
Turn key to position II or start the engine.
Press and hold down [READ] on the turn signal lever, and press the rear fog light
button 3 times quickly.
Press [READ] to advance to the next item.
Handy.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.