PDA

View Full Version : shadow's t5r.



Shadow
Tuesday 15th November 2011, 17:28
well where to start.

I got a call from a mate that was working as a valeter at a volvo dealer's in motherwell saying that there was an 850 been traded in and was going to be scraped and that he could get it cheep if i wanted it so went to see it and i couldn't believe what i was seeing. less then 5 minuets later i was driving home in a yellow 850 t-5r auto with a spotless interior and no body damage (tho the paint had seen better days) and it had just had all the brakes renewed as well as the rear calipers:). I ran the car for about a year and then decided to do a manual conversion so got all the parts i needed and changed it my self in my front garden
http://i216.photobucket.com/albums/cc36/Delboy480/P280410_1436.jpg
http://i216.photobucket.com/albums/cc36/Delboy480/P280410_1618.jpg

while i was there i changed the rear main oil seal and fitted an R clutch
http://i216.photobucket.com/albums/cc36/Delboy480/P050510_1131_01.jpg

the new seal is different to the old one its got a sort of felt ring on the out side of it.

once all the stuff under the bonnet was done i fitted all the interior parts.

http://i216.photobucket.com/albums/cc36/Delboy480/P280410_1649.jpg
this picture show the difference between the two pedal boxes
http://i216.photobucket.com/albums/cc36/Delboy480/P280410_2003.jpg
this it the inside all finished. and because all the parts i got came from another t-5r the gear knob and the center console all match the rest of the interior:)

So i ran it like this for about another 6 months or so then after going to a few mini meets decided that i had to do something about the paint. so as one of my mates is a spray painter he said that if i got the paint and other stuff need he would do it for free. when we eventually found some where to do the job it was started.
http://i216.photobucket.com/albums/cc36/Delboy480/P160810_1804.jpg
the guy in the red is my mate that painted it and the guy sanding the bonnet is my wee brother. the only panel that needed replacing was the front wing it had the usual rust behind the bumper but other than that there wasn't anything needed.
http://i216.photobucket.com/albums/cc36/Delboy480/P050910_1619.jpg
wraped and primed.
http://i216.photobucket.com/albums/cc36/Delboy480/P161010_1442.jpg
5 coats of volvo 607 yellow paint.
http://i216.photobucket.com/albums/cc36/Delboy480/P161010_1854_01.jpg
and a whole 5 ltr of lacker.

once all that had been done it was left for about a month to fully harden and then it was machine polished.
http://i216.photobucket.com/albums/cc36/Delboy480/IMG_0030.jpg
http://i216.photobucket.com/albums/cc36/Delboy480/IMG_0031.jpg
http://i216.photobucket.com/albums/cc36/Delboy480/IMG_0035.jpg
http://i216.photobucket.com/albums/cc36/Delboy480/IMG_0034.jpg.

I have done a few other things too. Iv fitted a RIP kit that i got for a fiver from a scrapyard and the 302 mm disk conversion the different head lights with hid's in them and red silicone hoses. iv also got an 850 R spoiler too just need to get it painted first. That's just about it just now next thing to do is the exhaust and the turbo and then get it remapped and maybe fit uprated rods at some point.

Flatout Phil
Tuesday 15th November 2011, 17:35
CHOICE :)

That said, not a fan of offset number plates (OCD) or projectors, but hey, what a sweet looking motor!

mitchyboy01
Tuesday 15th November 2011, 17:39
Looks fantastic mate. You are very lucky to have found it! I'm with Phil about the number plate though =) Any plans for engine mods or going to leave it standard?

Mitch.

p fandango
Tuesday 15th November 2011, 17:49
lol i was about to say it shouldn't have a RIP kit, then spotted you'd fitted it. Looks very nice, shame to see that people are getting more money trading/scrapping them in than selling them on

Shadow
Tuesday 15th November 2011, 17:55
thank's guys.

I have a lot of plans for the engine but no money just now:) aslo about the reg plate it was the only way i could mount it as i didn't want to put holes in the freshly painted bumper and it was kind of a rush job for the MOT. iv still got poly top mount and the lower wishbone poly bushes to fit.

this is where my love of volvo's started:)
http://i216.photobucket.com/albums/cc36/Delboy480/Image024.jpg

that was another fluke. bought it off ebay from someone in wigan without even driving it and he delivered it to aswell. it been the most reliable car i ever had. iv been everywhere in it and everything in it still works still using it just now as the 850 is going off road for the winter. its also has a rich mod ECU fitted to it and even for an old car with 135,000 on it it still shows up a lot of the newer socalled hot hatches.

daza-b
Tuesday 15th November 2011, 18:15
looks good the 850 :)

T5frankie
Tuesday 15th November 2011, 18:20
come on then how cheap? make us jealous

Murphy
Tuesday 15th November 2011, 18:20
Great example, though I am not a fan of your mods. Glad you saved one though!

The Flying Moose
Tuesday 15th November 2011, 18:28
Very nice motor indeed mate. I have always been a fan of the T5-R's, I had a black manual T5-R saloon and now on a red auto R saloon.

Whats more its really nice to see the car getting the attention it deserves, very rare too are the yellow saloons.

T5frankie
Tuesday 15th November 2011, 18:33
Very nice motor indeed mate. I have always been a fan of the T5-R's, I had a black manual T5-R saloon and now on a red auto R saloon.

Whats more its really nice to see the car getting the attention it deserves, very rare too are the yellow saloons.

the originals are more hardcore

Shadow
Tuesday 15th November 2011, 18:40
how cheap. well the the 850 was £800 to buy and i spent about £500 on it so far and the 480 turbo was £450 to buy and i spent about £400 on it.

i get the feeling people are going to hate me now lol.

T5frankie
Tuesday 15th November 2011, 18:50
£800 for a gull thats cheap mate well done

The Flying Moose
Tuesday 15th November 2011, 18:52
Im not going to hate you for the price of the car... not in the slightest, I too have had a T5-R for little under a grand albeit not a yellow one.

Im assuming the £500 was mainly the re-spray in which case its still a very cheap car.

Jamest5r
Tuesday 15th November 2011, 19:00
Fair play to you good job mate :)

As said above though move the plate and change the headlight's :)

T5frankie
Tuesday 15th November 2011, 19:03
Im not going to hate you for the price of the car... not in the slightest, I too have had a T5-R for little under a grand albeit not a yellow one.

Im assuming the £500 was mainly the re-spray in which case its still a very cheap car.

you can get "R"'s all day long for a grand but not a yellow one!

Jamest5r
Tuesday 15th November 2011, 19:08
you can get "R"'s all day long for a grand but not a yellow one!

Not mine you can't :)

The Flying Moose
Tuesday 15th November 2011, 19:30
you can get "R"'s all day long for a grand but not a yellow one!

Are you going mad Frankie? I did say "albeit not a yellow one" lol

I think I may start buying Volvos and spraying them yellow... mmm

Shadow
Tuesday 15th November 2011, 19:40
@T5frankie. it was cheap but it was almost white down one side it had faided that much.

@ the flying moose. the respray only cost £250.57:) and i know you's don't really hate me:)

@ jamest5r. i still have the standard front lights and the plate was put the so i didn't have to put holes in my bumper.

martybelfastt5
Tuesday 15th November 2011, 19:54
mate well done, great save and impreesed with what you have done so far,,looks fantastic great to see another gul saloon,as my sig reads ive a black one,tho my heart melts when i see a gul saloon t5r, in the later R model i love the red.. well done!

The Flying Moose
Tuesday 15th November 2011, 19:59
Shadow fancy re-spraying mine for me? Thats a bargain... plus beer tokens obviously ;)

T5frankie
Tuesday 15th November 2011, 20:17
Not mine you can't :)

why would i want a non runner :biggrin:

T5frankie
Tuesday 15th November 2011, 20:18
Are you going mad Frankie? I did say "albeit not a yellow one" lol

I think I may start buying Volvos and spraying them yellow... mmm

lol doing an"emlyn" lol

Shadow
Tuesday 15th November 2011, 20:22
i would if i could. the units i had where the car was sprayed caved in when the idiot that had the yard next door ran a truck recovery truck (the kind that can tow an artic) through the back wall.

Jim S70R
Tuesday 15th November 2011, 20:24
Very nice car, you've made some very nice changes too. Keep up the great work.

cameron
Tuesday 15th November 2011, 20:35
Lovely looking car buddy, well done.and i like the 480 as well, not many of them about these days. Big thumbs up :B_thumb:

M-R-P
Tuesday 15th November 2011, 20:56
As I said last night, very nice pair of sweeds you have there. Didn't realise the work that went into the R - well done. Too many 850s getting broken or scrapped these days (although nobody bats an eyelid when somebody breaks a P2 but their time will come:))
Glad to see no pics of the mental MR2 this time lol;)

AndysR
Tuesday 15th November 2011, 23:00
Nice looking car and it sounds like it's quite literally been saved!
I have to confess I don't like the headlights and the location of the front no. plate. If your worried about drilling the front bumper then stick the number plate on. Mines been fitted in this manor for over 4 years, it's still there and it's been bombarded with lots of warm soapy water over those last 4 years not mention the fact that it's been over 70 (recently on the 1/4 mile strip) and still showing no signs of going anywhere fast.. ;)

Shadow
Tuesday 15th November 2011, 23:49
it was a good save. i always want one but could never afford one. it been brilliant and a lot of fun to work on and i learned so much about doing the bodywork that i now know why it cost so much to get a car resprayed. also you should of seen the guy's reaction at spray store paint's when i asked for a gallon of volvo 607 paint lol. he look at me and asked if i was having a laugh and went and got the colour samples and asked if that was the colour i wanted and when i told him yes that's colour of the car he wouldn't believe me so had a bet with him showed him the car and got the static sheeting and the roll of brown paper for free!.

Volvostorm
Wednesday 16th November 2011, 00:17
Looking good, keep up the excellent work mate! :D

Flatout Phil
Wednesday 16th November 2011, 09:38
@ jamest5r. i still have the standard front lights and the plate was put the so i didn't have to put holes in my bumper.

I had same problem but double sided plate tape will work just fine - and that is with a plate held on the curve - needs to be the foam sandwich variety.

Shadow
Friday 13th January 2012, 19:03
bit of an update.

got these form a scrapy from an r V70 t5

http://i216.photobucket.com/albums/cc36/Delboy480/IMG_0125.jpg

the only thing thats diffrent is mine has a pressure regulater where this rail just has a what looks like a regulater but it does'nt have a return line so that will need to be swoped over for the one from my car. will these be a straight swop or will i need to wait till i get it remapped? im hopping to get an HLM ecu but will he be able to map it for the diffrent injecters and a de-cated exhaust if i just send the ecu?

also got this today aswell its the top hose for the standard rip kit.

http://i216.photobucket.com/albums/cc36/Delboy480/IMG_0123.jpg

also i think i found out what the top radiater hose is from going by pictures i found on ebay a ford fiesta mk1 xr2. i don't know how to make a link so heres the item number 220743040793.

piper1st
Monday 25th March 2013, 00:44
Good work Shadow ... most impressed with your DIY skills!! The 480 is looking good, could really do with being lowered tho!! ;0)

Scvolvo
Monday 25th March 2013, 00:52
Where did you get the hose for the standard rip kit from? Got a link?



bit of an update.

got these form a scrapy from an r V70 t5

http://i216.photobucket.com/albums/cc36/Delboy480/IMG_0125.jpg

the only thing thats diffrent is mine has a pressure regulater where this rail just has a what looks like a regulater but it does'nt have a return line so that will need to be swoped over for the one from my car. will these be a straight swop or will i need to wait till i get it remapped? im hopping to get an HLM ecu but will he be able to map it for the diffrent injecters and a de-cated exhaust if i just send the ecu?

also got this today aswell its the top hose for the standard rip kit.

http://i216.photobucket.com/albums/cc36/Delboy480/IMG_0123.jpg

also i think i found out what the top radiater hose is from going by pictures i found on ebay a ford fiesta mk1 xr2. i don't know how to make a link so heres the item number 220743040793.