PDA

View Full Version : Engine compatibility



dave stew
Monday 17th October 2011, 15:55
Is it possible to put a later 2.4 T5 engine into an earlier 2.3? I understand that the ECU etc is completely different, but would this affect the bare engine?

Santa
Monday 17th October 2011, 19:14
Is it possible to put a later 2.4 T5 engine into an earlier 2.3? I understand that the ECU etc is completely different, but would this affect the bare engine?

People put 2.4 T5's into S60R's so I assume it could be possible?

dalhousie2008
Monday 17th October 2011, 19:22
hi from what i understand the block is the same, but a larger bore

graemewelch
Monday 17th October 2011, 21:21
dosnt the 2.4 hav vvt and the 2.3 dosnt. not 100%sure so dont take my word for it

LeeT5
Monday 31st October 2011, 15:10
It is possible, but you will need to swap over all the engines ecu's, wiring harness complete etc etc. it's a big job. Just putting a 2.4 lump into the hole where an older 2.3 T5 used to be wont work. The old 2.3 T5 is motronic 4.3 and the later 2.4 T5 is motronic ME7.01. Therefore ecu's won't be compatible. The 2.4 T5 is 260 bhp where as the 2.5 R is 300 bhp but uses the same system as a 2.4. Later engines have VVT but not the earlier T5 engines.

merc85
Wednesday 2nd November 2011, 22:37
Surley if you mate the original intake manifold and exhaust manifold upto the engine and throttle body etc etc it should work?

We are talking a bare engine? obviously if its vvt then it will not work.

cherry1809
Thursday 3rd November 2011, 08:56
Couldn't you use the the 2.4/2.5 block and the 2.3 head?

M-R-P
Thursday 3rd November 2011, 09:11
It is possible, but you will need to swap over all the engines ecu's, wiring harness complete etc etc. it's a big job. Just putting a 2.4 lump into the hole where an older 2.3 T5 used to be wont work. The old 2.3 T5 is motronic 4.3 and the later 2.4 T5 is motronic ME7.01. Therefore ecu's won't be compatible. The 2.4 T5 is 260 bhp where as the 2.5 R is 300 bhp but uses the same system as a 2.4. Later engines have VVT but not the earlier T5 engines.

Me7 2.3 T5 has vvt on the exhaust bank. Thought I'd add that. don't know owt about swapping the engines;)

LeeT5
Thursday 3rd November 2011, 19:05
Me7 2.3 T5 has vvt on the exhaust bank. Thought I'd add that. don't know owt about swapping the engines;)

....yes and 2.5 R engine has VVT on both inlet AND exhaust.

M-R-P
Thursday 3rd November 2011, 19:07
:thewave: