PDA

View Full Version : Heater Blower not Blowing



Blackdog
Tuesday 13th September 2011, 12:54
Can someone please advise if there is a seperate control box or variable resistor to control the speed of the heater blower.

Mine has stopped blowing.

All the lights come on around the switch which indicates that power is getting there.

Fuse is intact as well.

LeeT5
Sunday 6th November 2011, 10:33
Can someone please advise if there is a seperate control box or variable resistor to control the speed of the heater blower.

Mine has stopped blowing.

All the lights come on around the switch which indicates that power is getting there.

Fuse is intact as well.

Read fault codes first and see if there is a fault code for ECC module.
if so, then your front panel is U/S. You need to access the blower unit and power up the fan. If the fan works then it is defo the control unit. If it doesn't then your blower unit is shot.

Access via the scuttle and lower passenger foot well. (Not a nice job)

Control unit is easy!
Hope this helps.