PDA

View Full Version : s60 2.0t rica



cragmaz
Saturday 10th September 2011, 17:41
Hi all,
Had my car Rica tuned today, and well impressed.
Std. On the dyno it did 175 bhp and 181 lb of torque.
After it did 202 bhp and 240lb of torque, bit down on quoted figures, but it has done 160k.
On the road it feels very strong, and flies.
Well pleased.

T5frankie
Saturday 10th September 2011, 18:15
rica over quote there figures mate, what was it supposed to get?

cragmaz
Saturday 10th September 2011, 18:21
rica over quote there figures mate, what was it supposed to get?




I know they do.mate, they quoted.225 and almost 300 torque

LiamT4
Saturday 10th September 2011, 20:23
I know they do.mate, they quoted.225 and almost 300 torque

Who cares, thats almost a 33% increase in torque (181 to 240), pretty decent result i'd say.

T5frankie
Saturday 10th September 2011, 20:51
300ib ft lol thats just stupid up from 180

turbo-tuner
Saturday 10th September 2011, 22:05
RICA quote 300 Nm not 300 lb.ft.

http://www.rica-uk.com/viewcar.aspx?vehicle=144

I think that considering the car has done 160,000 miles and was down on stock power anyway, the results are reasonable.

t5_monkey
Sunday 11th September 2011, 10:15
all the dyno plots I've seen (real one not fantasy ones!) give 30% improvement in mid range and about 10%-15% bump in top end power.

Yours seem on the money - 30-70, 60-100 or Terminal top speed on the 1/4 mile is the real deal when it comes to how powerful your car is (in the real world!)

jay30h
Sunday 11th September 2011, 10:24
Stage 0 and an having the injectors cleaned should find some lost bhp

cragmaz
Sunday 11th September 2011, 11:25
Thanks for the comments guys.
I am well happy anyway.

It's a lot better.

cragmaz
Sunday 11th September 2011, 11:27
RICA quote 300 Nm not 300 lb.ft.

http://www.rica-uk.com/viewcar.aspx?vehicle=144

I think that considering the car has done 160,000 miles and was down on stock power anyway, the results are reasonable.



Oops sorry.
I.am.well happy with the results anyway.

cragmaz
Sunday 11th September 2011, 21:01
Done some tests today. Don't know how they compare, but 50 to 70 mph was 8 seconds was 8 seconds, and 60 to 80 took 6.27 seconds. Felt very strong. LOving this map.!
ALso modded my intake, bymaking a heatshield, as when it was on the dyno, the cone was very hot, and the operator advised I needed to try and get it cooler, intake temp was 10 degrees higher at the intake than ambient. Tried it today, and its worked, a lot cooler than before.
Well pleased!

Craig.

t5_monkey
Sunday 11th September 2011, 21:18
Whats your 50-70 in 3rd ??

Should be about 5 seconds

60-80 in 6.27 seems pretty decent

stock S40 T5 is 4.5 (50-70)

cragmaz
Sunday 11th September 2011, 21:25
Whats your 50-70 in 3rd ??

Should be about 5 seconds

60-80 in 6.27 seems pretty decen


stock S40 T5 is 4.5 (50-70)

Dunno man, will try.
Did my tests in 4th

t5_monkey
Sunday 11th September 2011, 21:45
manufacturers spec for the S40 T5 in 4th was 6.0 50-70

so if you're in the 6 second bracket you're doing well :)