R.I.P Finished

[merc85]

11489 Here's a Updated pic of my new RIP setup, Had to buy a Straight 500mm length of 57mm Silicone Hose @ £20 inc postae.

But it does finish it off alot better.

[bigrotch]

Me like me like me want me want looks the nuts mate another job well done fella

[deathrider311271]

looks good mate, made a big difference??

[merc85]

looks good mate, made a big difference??

Sharper throttle response, Spool up seems alot quicker, also hear abit more woosh lol from the turbo.

Deffo recomend

[smithson007]

Think this will be going on my ever growing list of things to do.

[theflyingbrick]

job well done mate im looking forward to copying it ;)

[claymore]

That top piece of silicone looks awfully long to me, you might get it expanding on boost and it might even collapse on over run.

[merc85]

That top piece of silicone looks awfully long to me, you might get it expanding on boost and it might even collapse on over run.

Ok so you reckon put another piece of tubing in there?

Will expanding reduce Boost?

[Jamest5r]

That top piece of silicone looks awfully long to me, you might get it expanding on boost and it might even collapse on over run.

Got to agree, sorry Merc but that's far to long.


Ok so you reckon put another piece of tubing in there?

Will expanding reduce Boost?

What size is the piping? ive got loads of bits lying around you can have if it fits.

The expanding/contracting will split the hose soon enough.

[merc85]

Got to agree, sorry Merc but that's far to long.



What size is the piping? ive got loads of bits lying around you can have if it fits.

The expanding/contracting will split the hose soon enough.

It's ok People, I need all this info. I'm glad you guy's have pointed this out.

I've been reading up on silicone hoses and under heat and over a lon length they can loose Boost pressure.

I'm gonna put another piece of metal tubing in there since i have noticed a loss of boost. but not sure if this could be my recirc playing up again lol.

Will keep you all posted Thanks again people

[Jamest5r]

If you've got enough piping then put it together in a mock-up form and take it to an alloy welder and get him to weld it(that's what im doing :))

[merc85]

If you've got enough piping then put it together in a mock-up form and take it to an alloy welder and get him to weld it(that's what im doing :))

Will put another straight section in there 1st, and see what happens, then decide