PDA

View Full Version : strutbrace disney fit



cartoonhead
Thursday 18th August 2011, 21:47
got a genuine volvo strutbrace today and im well pissed off as its hitting off the brake fluid reservoir guy in volvo dealership says it is the right one but i dont think it is can anybody advise 1995 850 t5

LiamT4
Thursday 18th August 2011, 22:04
There should be a bend in the brace, that lets it go round it.

cartoonhead
Thursday 18th August 2011, 22:08
yes it has the bend in it but the brake fluid thingy is still in the way

LiamT4
Thursday 18th August 2011, 22:17
Not sure why it won't fit??
Maybe you have a different brake fluid resevoire?

Volvostorm
Thursday 18th August 2011, 22:23
What reg is your car?

I'm sure I read that the braces are not meant to be fitted to the earlier car (ones with the on-board diags)
Mines an early one, and the bar just touches the reservoir, but when we fitted one to T4_al's car, there was plenty of clearance.

james
Thursday 18th August 2011, 22:33
mine is a early n reg and mine almost touches

cartoonhead
Thursday 18th August 2011, 22:35
its an m reg was yours hitting the top or the front

antz
Thursday 18th August 2011, 22:46
Just cos its genuine Volvo doesnt mean itll fit direct. I know the genuine braces for the T4 need to have the fuse box re-located down about an inch. I found that out when I fitted mine.

Volvostorm
Thursday 18th August 2011, 22:53
its an m reg was yours hitting the top or the front

From what I can remember, the front, just above the join, but its only very lightly touching

cartoonhead
Thursday 18th August 2011, 23:09
think on my car the brake fluid thingy is bigger than newer models just offered it upto where it should sit and i dont see it fitting hitting top of brake fluid tank with it sill to go lower

thunderace
Thursday 18th August 2011, 23:43
iirc the genuine Volvo brace is not designed for early 850's with the larger master cylinder reservoir and ABS unit bolted to the N/S strut top, but I've seen a few fitted that just touch and they seem ok.
see here http://www.dvs.net.au/docs/8509495strutbrace.pdf

cartoonhead
Friday 19th August 2011, 00:05
cheers for the pics think i will just get a refund too much hassel

t5 stealth
Friday 19th August 2011, 01:39
have you got the strut top parts on the right sides,not left on right,right on left ?

stephenevans99
Friday 19th August 2011, 08:42
Sounds like it's a brace for a left hooker. Or perhaps not.....

p fandango
Friday 19th August 2011, 09:54
BT's an early T-5 (850 turbo actually) & the strut brace is not meant to fit, as you can see it is very close to the brake reservoir but never been an issue. There is a bracket bolted to the passenger strut top for the ABS wiring which needs removing, but again not a major problem i just left it off

http://i791.photobucket.com/albums/yy196/pedro-fandango/Volvo/mine/BT/Engine%20Bay/DSCF0027.jpg

nottsgreent5
Friday 19th August 2011, 10:02
Mines also a early 94 car and mine just touches the resivior but fits ok

Tomcat
Friday 19th August 2011, 10:47
Are you trying to fit it assembled or have you unbolted it?, if you don't unbolt it (or at least loosen the bolts) then it will be a pig to fit.

The Flying Moose
Friday 19th August 2011, 11:42
I had one fitted to my early M reg T5-R and it too touched but never caused any problems.

cartoonhead
Friday 19th August 2011, 23:18
went back to volvo dealership today and they agreed that it wont fit after the sales guy and a mechanic had a look cheers all...john

merc85
Friday 19th August 2011, 23:45
late 850 one's fits early 850's trid an tested.