View Full Version : Blanking plate
shrekblackR
Wednesday 6th April 2011, 23:13
Hi guys with a Blanking plate for recerc do I need to remove anything or just take off old plate and replace cheers
p fandango
Thursday 7th April 2011, 06:19
you'll need to bung up the pipe that went to the recirc valve as well, thats it
shrekblackR
Thursday 7th April 2011, 21:29
So do I remove the recirc or just the Blanking plate of the top
Volvostorm
Thursday 7th April 2011, 22:05
Remove the re-circ, it has 3 bolts, then fit the plate using the same bolts.
You going to be running a DV?
shrekblackR
Thursday 7th April 2011, 23:26
Remove the re-circ, it has 3 bolts, then fit the plate using the same bolts.
You going to be running a DV?
Dont know yet mate what's best ??
Volvostorm
Thursday 7th April 2011, 23:37
Has to be a twin-piston one,
http://cgi.ebay.co.uk/Forge-FMFK050-Volvo-850-T5-S70-V70-V40-Dump-Valve-Kit-/230382619061?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35a3dfc9b5
This is the kit I have, its gone up a bit!
shrekblackR
Friday 8th April 2011, 01:15
Can you run Blanking plate without dump valve ??
p fandango
Friday 8th April 2011, 01:22
Can you run Blanking plate without dump valve ??
oh yes :biggrin:
http://www.youtube.com/watch?v=fmNucK8712M
shrekblackR
Friday 8th April 2011, 04:56
oh yes :biggrin:
http://www.youtube.com/watch?v=fmNucK8712M
Very nice man
spesh
Friday 8th April 2011, 07:08
I know it sounds good running a blanking plate with no dump valve bit is it really good for the turbo????
p fandango
Friday 8th April 2011, 07:16
I know it sounds good running a blanking plate with no dump valve bit is it really good for the turbo????
i've only heard hearsay (not the group) saying they damage them & think that theory is taken from other cars which run higher boost levels than us, quite a few members posted up saying "they've had no recirc/dump valve for ???? time with no issues" when it came up before
JelT5
Friday 8th April 2011, 08:20
oh yes :biggrin:
http://www.youtube.com/watch?v=fmNucK8712M
Video Tart ;)
p fandango
Friday 8th April 2011, 09:24
Video Tart ;)
thank you http://smileys.emoticonsonly.com/emoticons/k/kiss_on_the_cheek-2590.gif
shrekblackR
Tuesday 12th April 2011, 11:21
Blanking plate on 30 mins !!!!!! Wot a cool noise even in an auto ,, cheers guys just need to get dump valve now lol
stevie69
Tuesday 12th April 2011, 11:39
howd you do it in 30mins?thats going to be my next task..
shrekblackR
Tuesday 12th April 2011, 11:55
Just took off the air flow pipes used a small 10 mill spanner and some patience sounds fantastic hope it goes well for ya mate
p fandango
Tuesday 12th April 2011, 12:06
Blanking plate on 30 mins !!!!!! Wot a cool noise even in an auto ,, cheers guys just need to get dump valve now lol
must of took longer to bandage your hand from the graces by the sound of it lol
JelT5
Tuesday 12th April 2011, 13:42
howd you do it in 30mins?thats going to be my next task..
Use a 10mm ratchet spanner :)
shrekblackR
Tuesday 12th April 2011, 16:58
Use a 10mm ratchet spanner :)
That's the way matey
si850r
Tuesday 12th April 2011, 21:59
Blanking plate on 30 mins !!!!!! Wot a cool noise even in an auto ,, cheers guys just need to get dump valve now lol
Do a vid mate, mines an auto too...I want to hear what it sounds like...cheers :wave23d:
cameron
Tuesday 12th April 2011, 22:16
Ive just done mine on my Auto at the weekend, i can only just hear it over the sound of my cat back exhaust, but does sound better on a manual :cry:
p fandango
Tuesday 12th April 2011, 22:18
does sound better on a manual :cry:
:pants: well thats easily fixed lol
shrekblackR
Friday 15th April 2011, 20:03
Dump valve in windows tinted just got to lower it now all done yay
shrekblackR
Friday 15th April 2011, 20:07
Ive just done mine on my Auto at the weekend, i can only just hear it over the sound of my cat back exhaust, but does sound better on a manual :cry:
Wel mine is a loud car and the chatter well drowns it out .. What air filter you running mate
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.