PDA

View Full Version : Help! - Washer bottle.



Goof
Monday 6th December 2004, 21:20
Light flickered on a few times, so I decided to top up the washer bottle.
Now, is it me being thick, or is there a knack of getting more than a quarter of a pint of water in the bottle?
Mine was over-flowing without having put more than a bit in! - mind you I was trying to fill it in the dark, but how difficult can it be? - remove top of bottle, insert water???
Low washer light was still flicking on, but didn't have more time to investigate...
- Or is it a "dealership only" operation! [joke]
:shifty: :cuckoo: :slap:

Goof
Tuesday 7th December 2004, 20:03
Tried again today in daylight - seems that the neck is not straight, so I took my time and filled it with no probs!
Case closed.

Pedro Fandango
Tuesday 7th December 2004, 20:08
the neck actually pulls out of the tank, pull the neck towards the front of the car to unclip it from the mount next to the OBD unit & then upwards. Refitting is opposite to removal (as they say in the Heinz manual)

Bracer
Wednesday 8th December 2004, 09:00
Glad your all sorted :thewave:

LMAO thou :wink:

Goof
Wednesday 8th December 2004, 19:47
the neck actually pulls out of the tank, pull the neck towards the front of the car to unclip it from the mount next to the OBD unit & then upwards. Refitting is opposite to removal (as they say in the Heinz manual)
Thought the neck looked a little croshed inside - suppose that's it!

And yes Bracer - I will start reading the manual! :worship: