downpipe

[T5frankie]

If i wanted to fit a 19t on my car what exact uprated downpipe would i need? and what uprated downpipe would i need for my 18t?

[p fandango]

i've got a 3" angled Ferrita downpipe on my 19t. Because i've got the exhaust bypass valve i went for the normal 850 system which has 2.5" post cat, Hamish said there is one off another model which will fit & is 3" post cat

[T5frankie]

pardon? so what do i need lol

[p fandango]

pardon? so what do i need lol
depends what you want. Ferrita do an angled downpipe with either 3" or 2.5" after the cat so depends what your using for the rear section

[T5frankie]

depends what you want. Ferrita do an angled downpipe with either 3" or 2.5" after the cat so depends what your using for the rear section

3" all the way through with no cat at all

[p fandango]

3" all the way through with no cat at all
think Ferrita will do a special order with no cat, or you can buy a normal one then get the cat cut-out but Ferrita cat's aren't cheap. Best speak to Hamish to see what they can do

[T5frankie]

think Ferrita will do a special order with no cat, or you can buy a normal one then get the cat cut-out but Ferrita cat's aren't cheap. Best speak to Hamish to see what they can do

so the downpipe comes complete with a cat?

[p fandango]

so the downpipe comes complete with a cat?
yep

[T5frankie]

wher is the cat on this then?


http://www.dragtimes.com/images-classifieds-large/OBX-Down-Pipe-Turbo-01-07-Volvo-S60-2.4T-T5-Exhaust-for-sale_190462726633.jpg

[p fandango]

wher is the cat on this then?


http://www.dragtimes.com/images-classifieds-large/OBX-Down-Pipe-Turbo-01-07-Volvo-S60-2.4T-T5-Exhaust-for-sale_190462726633.jpg
OBX systems don't come with a cat to keep costs down, it should be between the 2 lamba fittings

http://i791.photobucket.com/albums/yy196/pedro-fandango/Volvo/BT/Turbo%20Manifold%20Exhaust/7.jpg

[T5frankie]

IS the exit from an 18 or 19t always 2.5 inch? And would a v70r awd obx downpipe fit my 2wd?

[p fandango]

IS the exit from an 18 or 19t always 2.5 inch? And would a v70r awd obx downpipe fit my 2wd?
i understand the straight turbo outlet (18t) is 2.5" while the angled (19t) is 3". The AWD downpipe is totally different & very restrictive because of the extra turns needed to get around the rear output shaft, Bomb192k will confirm if it will fit but its certainly not the one to go for

[T5frankie]

I have seen an awd one for sale off a 19t and that's a 2.5inch at the turbo end and 3inch the other