PDA

View Full Version : Code read out



silverswedemachine
Sunday 20th February 2011, 17:35
After yesterday's thread about my ECU light comin on, i made Fandango's code reader and it tells me 2-3-2 which in the big red book says 'Long term fuel mixture too weak or too rich at idle' assumin mine is the Motronic 4.3 (96 t5)... Not really sure what to do with that, is that summat to do with HLM rica remap or is it likely something else is not happy??? cheers watto...

p fandango
Sunday 20th February 2011, 17:42
i'd think an air leak is messing the idle fueling up

nobananas
Sunday 20th February 2011, 19:42
i'd think an air leak is messing the idle fueling up

I'd second that, remember your re-map will be boosting higher than standard so any weak points in the piping etc may now come to light. Other possibilities could be MAF or Lambda.

silverswedemachine
Sunday 20th February 2011, 19:59
Thanks chaps, had a good look round earlier and can not find any thing loose or damaged, i changed all the vac lines to plastic tubing not so long back... Must be something else...