so just to re-cap on needed parts for rear axle change cheers

[watchmytracer]

for a swap of rear axles from ones with nivomats to standard .bearing in mind i will have axles delta bushes things,springs,etc (will i need different shocks or make sure i get the old shocks)

if i require any other items please let me know as i want to get every thing in one go cheers again

sensor or sender loom possibly
top mount seat but not the rubber (should i do this anyway)
brake pipe stuff
handbrake stuff


and for the front suspension top mount rubbers

rubbers

anything else??

[nobananas]

If you (or your garage) unbolt the front shocks from the front hubs to change your top mounts (two bolts) then you will loose your camber setting for the front wheels so either make sure the area thats unbolted is marked so it can be replaced in exactly the same place or have the camber set afterwards. You will probably need to have a 4 wheel alignment done after the back axle has been replaced as well.