Dump valve fitting

[Ade]

Got a DV and blanking kit on its way.... had a quick look today but I can't see where it's meant to go! :lol:

Don't see any recirculating DV in there....

It's a '95 T5

[Volvostorm]

Have a look here:

http://www.vpcuk.org/forums/showthread.php?t=25219&highlight=recirc+blank

[woking rob]

It's on the turbo, fit the blanking plate but not the new dump valve and take it for a spin first sounds so much better (some say it might mess the turbo but I wouldn't worry as I'm guessing u won't b running silly boost)

[p fandango]

you can see the triangular recirc blanking plate on the right of the turbo

http://i791.photobucket.com/albums/yy196/pedro-fandango/Volvo/BT/Turbo%20Manifold%20Exhaust/g.jpg

[Volvostorm]

you can see the triangular recirc blanking plate on the right of the turbo

http://i791.photobucket.com/albums/yy196/pedro-fandango/Volvo/BT/Turbo%20Manifold%20Exhaust/g.jpg

Oh, dinky turbo! :shifty:

[The Flying Moose]

As mensioned the blanking plate goes on the turbo to replace the recirc valve. The dump valve is usually fited between the intercooler and idle control valve right at the front of the car.

See the picture below:

http://memimage.cardomain.com/ride_images/3/2816/201/32037600007_large.jpg

[p fandango]

Oh, dinky turbo! :shifty:
ah but it hasn't got lardy arse stuff like carpet, heater, dash, doortrims, glass, seats etc to lumbar around lol

[p fandango]

As mensioned the blanking plate goes on the turbo to replace the recirc valve. The dump valve is usually fited between the intercooler and idle control valve right at the front of the car.
& as close to the throttle body as possible

[Volvostorm]

ah but it hasn't got lardy arse stuff like carpet, heater, dash, doortrims, glass, seats etc to lumbar around lol

Neither has mine, its still in the box, waiting to be fitted! :P

[Ade]

Cool, see how it goes now!

Will be running a BAR of boost with a Rica map soon. It is tempting to just run without one as I love the sound of turbo stall..... just don't really want to be replacing a turbo though!

Are 16t turbos and 350cc injectors expensive/come up often?

[claymore]

Cool, see how it goes now!

Will be running a BAR of boost with a Rica map soon. It is tempting to just run without one as I love the sound of turbo stall

que pedro video clip

[The Flying Moose]

Cool, see how it goes now!

Will be running a BAR of boost with a Rica map soon. It is tempting to just run without one as I love the sound of turbo stall..... just don't really want to be replacing a turbo though!

Are 16t turbos and 350cc injectors expensive/come up often?

Indeed you will!

The 16T's are fairly common but becoming rarer, can be anywhere from £50-£100, as for injectors £30-£60 depending on whether they have recently been refurbed or cleaned.

[p fandango]

que pedro video clip
oh go on then lol

http://www.youtube.com/watch?v=fmNucK8712M

[Ade]

cool, cheaper than I thought!

[Rudeyboy18]

As mensioned the blanking plate goes on the turbo to replace the recirc valve. The dump valve is usually fited between the intercooler and idle control valve right at the front of the car.

See the picture below:

http://memimage.cardomain.com/ride_images/3/2816/201/32037600007_large.jpg

Ive got mine looking the same, but im not sure where to run the vaccum pipe from the top of the valve too..... My fitting kit just say attatch to inlet manifold. Is that one of the pipes coming off of the exhaust manifold?? there are 2, one above the other. The lower one looks more like the size i need.... Please help as im worried i'll do it wrong and shag the engine or something. My saab 9-5 is SOOO much easier to work on.

[oblark]

The vac for the DV comes off the INLET manifold, in the same place as your recic valve vac hose.

[T5frankie]

stick it onto the vac tree under the black cover under the dizzy cap