PDA

View Full Version : 700 + 900 series tuning:



Murphy
Monday 29th November 2004, 10:45
For the cost of the car and £4620 you can have in excess of 400bhp allegedly through the rear wheels :dgrin: .


How?

Well here goes:

Take either model with a B23FT or B230FT engine.

Add the following:

Low-Restriction Cat-Back Exhaust
* Boost Enhancement
* Calibrated Boost Gauge
Performance Camshaft
* Adjustable Cam Timing Wheel
* Double Valve Springs
* Air/Fuel Ratio Gauge
* Elevated Boost
1990 or Later Exhaust Manifold
* Upgraded Turbocharger
* Rising Rate Fuel Pressure Regulator
* Chip for ECU
Oversize or Additional Fuel Injectors
* Water Injection
3-Angle (or more) Valve Job
* Oversize Exhaust Valves
* Port & Polish and/or ExtrudeHone Head
* ExtrudeHone Intake and Exhaust Manifolds
Stroker Kit
* Align Bore Block
* Balance and Blueprinting

All the information can be found here: http://www.mcbrooms.com/volvo/fast700.htm

Bracer
Monday 29th November 2004, 11:01
Mmm

Sound good if you like getting your arse out :eek:


:hidesbehi

Murphy
Monday 29th November 2004, 15:40
Mmm

Sound good if you like getting your arse out :eek:


:hidesbehi
Lol

It would be slighlty interesting in the wet, esspecially if you have that sleeper look on standard wheels :eek:

Bracer
Monday 29th November 2004, 15:46
Lol

It would be slighlty interesting in the wet, esspecially if you have that sleeper look on standard wheels :eek:

400hp on stock 185 tyres :eek:

You can get ££££ed off, nothing less than 235 thanks :wink:

Sometimes the sleeper look just aint appropriate :firedevil