cluch has started slipping

[pikeajm]

ok bad news for me clutch has started to slip how hard is it to change myself and whats involved in doing one on an r plate s70 t5 it looks like i got to drop the subframe i am a machcanic have an onc in it
money is very tight right now witch does not help and does it have that stupid hydrollic thrust bearing??

[siamblue]

Yes Pike it does have that hydraulic bearing,

[vt5]

Had mine done recently.
The hardest part apparently was dropping the subframe as the bolts were not for budging. Apparently though once that was done it was pretty straight forwards....

[Rooster]

I've got a clutch part no, 271956 its for a B5234T5 engine which some ppl on here told me was one of the R engines,

If it is right clutch for you car make me an offer and its yours

[lance]

Make sure you do the main rear oil seal while you are at it , it will only take about another 20mins once the gearbox is out and it costs around £15.

[elliot]

you also dont need to pull the steering wheel out and up like the haynes manual says!Its a fairly easy job,have fun.