PDA

View Full Version : ETM removal



dave.w
Saturday 8th May 2010, 13:13
Hi people does anyone know a simple way of removing the ETM to clean it out as I have a tick-over problem ie revs hunting? the car is an S60 T5 2001.

Alexdaredevilz
Sunday 9th May 2010, 21:58
Undo plastic pipe from intercooler to ETM, four 10mm bolts going through the ETM, undo wiring, get a tooth brush with petrol or spirits and woolaaa i done mine recently and it worked a treat

v70torslanda
Sunday 9th May 2010, 22:32
Carb cleaner! Petrol is asking for trouble . . .

Loadsamiles
Sunday 9th May 2010, 23:48
Dead easy... I can remove mine in well under 20 mins.

Better to attack the job full on.

1 Remove the over engine charge air pipe

2 Remove dipstick (to prevent damage)

3 Fold the rubber elbow pipe from the OTE pipe up behind the dipstick.

4 Undo the wires and water return pipe from the top of the fan housing

5 Unbolt the 2 bolts in the top of the fan housing, unplug the fan, and slide the housing up clear of the radiator.

6 Unscrew the jubilee clip into the ETM and push the plastic intake pipe down away from the ETM

7 Unbolt the 4 ETM bolts, unplug and remove.

dave.w
Monday 10th May 2010, 18:45
thanks for all your info everyone, will give it a go at the w/ end.