Cheap 19t upgrade ?

[bubba_1986]

Was looking on net for price for 19t, and cam across this

http://cgi.ebay.com.au/Mitsubishi-TD04-19T-Turbo-Compressor-Wheel-Upgrade-Kit_W0QQitemZ270547281461QQcmdZViewItemQQimsxZ2010 0316?IMSfp=TL100316131001r14047

Or this one

http://cgi.ebay.co.uk/Mitsubishi-TD04-19T-Upgrade-Compressor-Housing-Wheel-_W0QQitemZ370359085843QQcmdZViewItemQQimsxq2010040 3?IMSfp=TL1004032110001r16333

Is this possible to just modify my current 16t to make into 19t then and custom map would be needed ?

Or am i dreaming lol

[p fandango]

sounds like the same sort of thing that FFM's turbo's had done. Changing the compressor wheel like that will mean the turbo will need rebalancing

[Barnsley-Bill]

what about this http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140398037907&ssPageName=STRK:MESELX:IT

[Rnash2002]

what about this http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140398037907&ssPageName=STRK:MESELX:IT

Cant belive you still have this,going on mine running just 10psi for now they seem a good turbo.

[Alan M]

sounds like the same sort of thing that FFM's turbo's had done. Changing the compressor wheel like that will mean the turbo will need rebalancing

Sort of. FFM's had to have all the machining to the compressor housing to keep the recirc. His was balanced though when I finished it.

[p fandango]

Sort of. FFM's had to have all the machining to the compressor housing to keep the recirc. His was balanced though when I finished it.
didn't even notice the recirc missing from the ebay adverts, no great loss anyway lol

[Barnsley-Bill]

Yup I still have it, i've been offered a price on it but it would be too much of a drop for what I paid for it so I might relist it later on.

[Rnash2002]

Yup I still have it, i've been offered a price on it but it would be too much of a drop for what I paid for it so I might relist it later on.

I would say your probably having problems selling it because not many people have them fitted,i think theres a few on the US site but only 1 person has had theres dynoed,think it was only at 14psi and with a standard map,made a pritty good figure though.
Having fitted one there not that bad to do as long as you have all the stuff ready to go on and mines running just 10psi feels good.
Anyway good luck with the sale :)

[Barnsley-Bill]

I know a few who have fitted these on there cars T5s and 850s and have great performace out of them :).

and in a few weeks once the engine i'm building is ready I'll have a 16T and a S60R exhaust manifold for sale as I'm fitting a Garrett 2871R turbo :).