PDA

View Full Version : Getting to binnacle bulbs...



Flatout Phil
Wednesday 7th April 2010, 23:44
I have a nasty feeling this involves taking the dash top off? Any explanations on this one as one of the bulbs on my clock panel has gone, and there is something a bit fungal looking (yuck) inside the speedo perspex.

p fandango
Thursday 8th April 2010, 04:57
yes the top does need to come off, but its not as hard as you'd think. Bascially a screw in the top of each air vent, a couple top of the speedo & a few in the door ends

Clan998
Thursday 8th April 2010, 11:07
I have a nasty feeling this involves taking the dash top off? Any explanations on this one as one of the bulbs on my clock panel has gone, and there is something a bit fungal looking (yuck) inside the speedo perspex.

Hi mate as pedro says its not too hard .... ive done it in about 30 mins replaced bulbs and all back in place ...That was on the 3rd go mine you .

If you need a hand or advise just call

Rich

mhill53
Friday 9th April 2010, 21:35
may attempt this as a couple of my warning lights (petrol light being one of them) have duff bulbs in!

stevie69
Monday 5th July 2010, 22:58
where will i find bulbs for my clock in the dash as mine have packed in?

cameron
Monday 5th July 2010, 23:05
Any decent motorfactors / car spares place should have the bulbs you need :B_thumb:

Really easy job, off and back on in no time at all.

stevie69
Monday 5th July 2010, 23:11
what would i search for on ebay??