C70
Saturday 3rd April 2010, 15:59
Anyone got details on how to replace?
thebadger
Saturday 3rd April 2010, 20:45
Pretty easy...
4x T25 Torx screws hold the back plate of the tailgate (inside, one in each handle & two at the top edge) watch out for the top cowl falling off the top of the door, 3x 12mm bolts (IIRC) hold the motor, 1x 14mm nut holds the wiper arm.
There's an electrical plug & the washer hose to remove.
Pulling the wiper arm is the hardest part. Re-fitting the bottom of the door is tricky, having a helper is good, but not essential.
A strong clamp, or bulldog clip is a good idea to "pinch" the hose & prevent it emptying all over you or the boot!
HTH
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.