PDA

View Full Version : 940 2.3 turbo



woking rob
Thursday 1st April 2010, 21:55
wot engine does this have? is it the same as my t5? is it rwd? what r they like as i have seen one for 450 thank u rob

daveforber
Thursday 1st April 2010, 22:00
I believe it's a 4cyl, so not a T5. But it is RWD and, apparently, not difficult to make quicker.

woking rob
Thursday 1st April 2010, 22:05
cool might b the way my t5 might go lol
would it b hard to fit a t5 into it? i love the toque

t5 pete
Thursday 1st April 2010, 22:06
it will be a 2.3 clyinder red block it might have a m90 gear box aswell.
smithy has one im sure he will be here soon to explain more

t5 pete
Thursday 1st April 2010, 22:13
were converting every one smithy

Jamest5r
Thursday 1st April 2010, 22:48
it will be a 2. 4clyinder red block it might have a m90 gear box aswell.
smithy has one im sure he will be here soon to explain more

He's working night's so dont expect a reply till sixish tomorrow morning

Here is a sorted 940......http://www.vpcuk.org/forums/showthread.php?t=23842

cherry1809
Friday 2nd April 2010, 00:19
Tis the 2.3 "Red Block"
16v valve head will go on if you have time and money.
Was thinking about the same engine in a 245 a while back.
There's a 940 estate near where I work for sale, But it's only the 2.0 Turbo. Clean though for £675.

Flatout Phil
Friday 2nd April 2010, 09:33
http://www.youtube.com/watch?v=uwbOHVr0e-Y&feature=related

http://www.autotrader.co.uk/classified/advert/201012355524584/sort/priceasc/usedcars/model/940/make/volvo/radius/1500/quicksearch/true/page/1/postcode/se91pe?logcode=p

smithy
Friday 2nd April 2010, 14:14
cool might b the way my t5 might go lol
would it b hard to fit a t5 into it? i love the toque

hello mate the 2.3 8v redblock has loads of torque and even with the standard weady turbo whitch is a 13c you can pull 220 to 250 bhp with a chip and mbc very cheap.and with that kind of power these cars can realy shift due to being rwd.then stick a 15g to 19t on, exhaust,slightly bigger injectors ,fpr,chip then 300 bhp.with a modded head ,cam,garrett t34 and above then its 350 bhp above with a bit tuning.hope this helps

woking rob
Friday 2nd April 2010, 21:19
thats wickid im gonna have to get one as im gonna struggle to put power down in the t5
wot is the best one to get? 940 turbo or a 960? and when i say best i mean best for money just want something with a good bit of poke but will b able to hang it out!!

t5 pete
Friday 2nd April 2010, 21:29
the 940 i would say is a much more tuneable and alot more stronger engine also modding it will be very chhep untill you need to go for larger turbos but stick a 15g or 16t and it will fly

woking rob
Saturday 3rd April 2010, 08:38
r they a strate swap?

Flatout Phil
Saturday 3rd April 2010, 08:53
This has just been released by IPD - 16v turbo old skool 240 but looks GREAT!

http://www.youtube.com/watch?v=vxb6va-8Dzg&feature=digest

woking rob
Saturday 3rd April 2010, 09:31
thats gonna b wickid but looks like alot of cash gone into it

smithy
Sunday 4th April 2010, 13:55
thats gonna b wickid but looks like alot of cash gone into it

i would get a late 940 lpt 1996 to 1998 model witch i got they come with a g80 locker diff standard and m90 box and the engines are the same on the 2.3hpt and lpt .just put a 16t on ,exhaust and chip it with some me7 blues gut take the ballist resistor pack out and you can run up to 280 bhp ,stick a cam in it because the standard cam sucks and taking 300 bhp no probs and that is running 20 psi.these engines are scerter blocks and very strong and can take a hammering mate.also suspension upgrades are cheap too.and all the t5 rims fit with spacers too.

rick84
Thursday 8th April 2010, 10:31
i would get a late 940 lpt 1996 to 1998 model witch i got they come with a g80 locker diff standard and m90 box and the engines are the same on the 2.3hpt and lpt .just put a 16t on ,exhaust and chip it with some me7 blues gut take the ballist resistor pack out and you can run up to 280 bhp ,stick a cam in it because the standard cam sucks and taking 300 bhp no probs and that is running 20 psi.these engines are scerter blocks and very strong and can take a hammering mate.also suspension upgrades are cheap too.and all the t5 rims fit with spacers too.

Hi mate, what's the Ballast resistor pack and how do you take it out. running 15psi with an MBC and chips, no other mods at the moment, will this make a difference?

smithy
Friday 9th April 2010, 12:38
Hi mate, what's the Ballast resistor pack and how do you take it out. running 15psi with an MBC and chips, no other mods at the moment, will this make a difference?

no point in putting bigger injectors in with standard turbo mate better putting a desent performance exhaust and filter on it will go alot better hope this helps

rick84
Friday 9th April 2010, 14:25
I've got a 15g now, just need to get it "clocked" for RWD (got a pdf about doing this but looks pretty difficult), then I'll look at getting an exhaust to fit it, probably a 3" decat system.

smithy
Friday 9th April 2010, 18:11
I've got a 15g now, just need to get it "clocked" for RWD (got a pdf about doing this but looks pretty difficult), then I'll look at getting an exhaust to fit it, probably a 3" decat system.

if you use the 15g then get a 4bar ajustable fpr mate that will turn the pressure up on your standard injectors to fuel the 15g .i use a fse fpr not a power boost valve.