dump valve blanking plate

[woking rob]

does any1 no how hard this is to fit?

[danny-R]

quite easy really although a little fiddley.
i changed recirc for blanking plate a few weeks ago took about 10 mins max.

10mm wratchet spanner is a must!

[woking rob]

what has gotta b done?

[danny-R]

not much really, other than when i took the 3bolts out of the recirc valve 1 was shorter than the other 2. and wasn't long enough due to the thickness of the blanking plate.
found one in my box of bits- job done

[woking rob]

wot will i do with the vac hose? just block it off? will i b able to run my boost gauge off of this vac hose?

[phil_woods]

quite easy really although a little fiddley.
i changed recirc for blanking plate a few weeks ago took about 10 mins max.

10mm wratchet spanner is a must!

OMG!! 10 minutes!!

mine took me bloody hours due to the fiddlyness!
you must be some kind of blanking plate fitting pro!

(how many !'s did I use in this paragraph?)

[mattp]

wot will i do with the vac hose? just block it off? will i b able to run my boost gauge off of this vac hose?

Either block it up, or yes it can be used for a boost gauge

[danny-R]

OMG!! 10 minutes!!

mine took me bloody hours due to the fiddlyness!
you must be some kind of blanking plate fitting pro!

(how many !'s did I use in this paragraph?)



quite the opposite mate, i would normally get my mate to do it for me but i done it when i had my new starter fitted.
just trying to get my head round my rear wheel bearing now :(

[mexybhouy]

quite easy really although a little fiddley.
i changed recirc for blanking plate a few weeks ago took about 10 mins max.

10mm wratchet spanner is a must!

10 MINS? You must have fingers the same length as Edward Scissorhands!!!! lol!
Done a few, wratchet spanner a must!!!!

[siamblue]

I have a forge one if someone wants one, but ideally i wanted to sell it with the Bailey BOV and the connecting pipes,


Gary

[woking rob]

I have a forge one if someone wants one, but ideally i wanted to sell it with the Bailey BOV and the connecting pipes,


Gary

i would of but i just brought one
how much posted?

[simpT5]

Does anybody know of any issues when blanking off the recirc valve and having no dump valve on a T5 with ME7 management?

I'm quite liking the idea as I think the 'chatter' sound thats produced as the turbo compressor stalls is lovely but I dont want to cause damage to anything or upset the ecu!