View Full Version : Top Mount and ETM
MattM
Monday 18th January 2010, 09:30
Hopefully this should be a quick one.
Top mount is gone, so I ordered a new one, however it looks different to the one currently on the car.
Current:
http://img10.imageshack.us/img10/8281/img0991.png
New:
http://img211.imageshack.us/img211/7396/img0993.png
Is this correct?
Secondly, I'm trying it locate the ETM but for the life of me can't see it. Where should I be looking ?
http://img168.imageshack.us/img168/6973/img0992.png
Thanks
scooter
Monday 18th January 2010, 09:35
the mount looks the same as mine
Al115
Monday 18th January 2010, 09:44
ETM is under the inlet manifold. Have fun! :)
MattM
Monday 18th January 2010, 09:51
ETM is under the inlet manifold. Have fun! :)
I assume this is the correct place to look?
http://img30.imageshack.us/img30/7300/img09921.png
If it is, I can't see anything at all.
Al115
Monday 18th January 2010, 10:13
Yes it is. It's right under there... you won't see it from above.
v70torslanda
Monday 18th January 2010, 10:15
Top mount is the modified unit. Far more reliable and longer lasting.
MattM
Monday 18th January 2010, 10:17
Top mount is the modified unit. Far more reliable and longer lasting.
Thanks :)
Yes it is. It's right under there... you won't see it from above.
Bugger. What's the best way to get a look at it? Underneath?
timbo_1975
Monday 18th January 2010, 10:27
If you remove the cross over pipe, you can at least see the ETM! They arent that easy to get to, as you have discovered. :(
Al115
Monday 18th January 2010, 10:51
Shame they're the least reliable thing on the cars, really :P
Wobbly Dave
Monday 18th January 2010, 11:11
ETM is about the size of a tissue box and has 4 mounting bolts that screw in from underneath. It's unpleasant to get to. Read wot I wrote 4 years ago on them...
http://www.vpcuk.org/forums/showthread.php?t=10027
I have BTW the uprated top mount too (ME7 C70). As Ali said - These ones don't fracture over time as they work under compression - and the opposite side doesnt get pulled, which is where the split happens.
MattM
Monday 18th January 2010, 12:32
Thanks :)
Can't wait to get it on tbh. Shame I don't have the tools...
scooter
Monday 18th January 2010, 13:10
I apologise in asking on some one else thread but i bought upgraded mount bush poly bush my current mount is mattm new on but the bush that i bought seems to be the bush for matts old one will it still fit Sorry again matt
Al115
Monday 18th January 2010, 13:35
I think the mounts are very similar, it's the bushes that are different.
MattM
Monday 18th January 2010, 17:46
Top mount changed. It was more time consuming than I thought. A lot of very tough bolts to undo. When I finally got the mount off the car, the middle of the bush fell out! Good job I changed it.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.