PDA

View Full Version : tailgate probs 850



Bob France
Sunday 20th September 2009, 00:16
The tailgate on my 850 R has completely collapsed[ie won't hold up on its own].
is this adjustable or do I have to get spare hydraulics,if so,any ideas what where and how,[getting p####d off with having to prop the door up with a broom handle] LOL.thanks for any help,Bob

p fandango
Sunday 20th September 2009, 00:23
i'm sure its a new strut job i'm afraid, PFV sell them quite cheap LINK (http://www.partsforvolvosonline.com/product_info.php?products_id=3232)

Tomcat
Sunday 20th September 2009, 00:24
You need new tailgate rams, they're easy to replace if you have a brush to hold the tailgate open while you change them. Speak to RUFE for a price for the rams.

Bob France
Sunday 20th September 2009, 00:28
Thanks lads ,is it a hard job, given that I've got one of those toolkits that does the weird and wonderful things!!!!!

t5_carl
Sunday 20th September 2009, 00:37
you have got to take the trims off either side,theres a little torx that holds it do it with the boot open!!!!

Tomcat
Sunday 20th September 2009, 00:38
Nope the struts are just held on by clips...

t5_carl
Sunday 20th September 2009, 00:44
i ment the trim bud:D

Tomcat
Sunday 20th September 2009, 00:52
you have got to take the trims off either side,theres a little torx that holds it do it with the boot open!!!!

I think we both sort of posted at the same time, I wasn't suggesting you where wrong..

t5_carl
Sunday 20th September 2009, 01:00
lol,my bad:D

Dangerous Dave
Sunday 20th September 2009, 01:07
check out my guide to replacing the tailgate struts in the 'how-to' section of the forum. I would post a link, but am on my phone sorry.

Tomcat
Sunday 20th September 2009, 01:09
Well rememberd that man.....Here's the Linky..... (http://www.vpcuk.org/forums/showthread.php?t=15665&highlight=tailgate+struts)

t5_carl
Sunday 20th September 2009, 01:14
good guide!!i should of done one for fitting the recirc blanking plate..

Dangerous Dave
Sunday 20th September 2009, 08:53
i should of done one for fitting the recirc blanking plate..

I've had my recirc valve off many times now, just gets easier and easier LOL. Just don't do it when the engine is hot, them bloody water pipes are a pain!