Has anyone twin exit pipes on thier 850?

[Niles]

If you have, how did you do it & do you have any good pictures? Pleeeeeease?

[cameron]

Niles buy these............

http://www.jt-tuning.se/shop/prod.aspx?productid=398360&groupid=59295&sortafter=0&sortafterchild=0&refcode=p

432 Euros or £366 :D

Its only cat back though

Joins onto the exisiting exhaust and the tail pipes look lovely :D

[JelT5]

Yep its lurvely...was gonna buy that one myself, but opted for single instead as it's noisier lol

[p fandango]

If you have, how did you do it & do you have any good pictures? Pleeeeeease?

http://img26.imageshack.us/img26/3425/archive9.jpg
Powerflow made mine, it goes thru the suspension on the passenger side the same as the factory exhaust then splits & gioes under the spare wheel well. I'll take a pic of underneath once i go out to do more work

[Jamest5r]

Mate they look good but will lose you power! too much restriction on the air flow

[Tomcat]

How do you work that out then??.

[Jamest5r]

Straighy through has got to be better? thats what i always was led to belive

[p fandango]

Mate they look good but will lose you power! too much restriction on the air flow
S60R exhaust manfold, 3inch Ferrita downpipe with 100cel cat, 2.5" tube joining into a single Powerflow medium backbox. Or if thats too much flick the switch & the 3" exhaust cut-off valve opens & gives an overall exhaust length of about 1.5 foot. What restriction lol

http://img241.imageshack.us/img241/8639/49502546.jpg

http://www.youtube.com/watch?v=_nf301F9S84

[p fandango]

Straighy through has got to be better? thats what i always was led to belive
it is, but that doesn't make a twin exit any more restrictive than a single exit, especially as mine follows the route the original with the second exit T'd off after the rear axle

[Jamest5r]

You live and learn

[flyingbrick]

Twin exit on mine sounds great. Me and my mate fitted it at his garage. Mine is from the cat was a pain in the arse to fit because of my towbar. The pipe that goes from the n/side across was banging on the tow bar. After afew mods it was on. Cutting the hole in the o/side rear valance was easy with a air chisel. There getting hard to find at the right price but well worth doing mate.

[p fandango]

the pics as promised

http://img517.imageshack.us/img517/1347/picture001hta.jpg
the split, you can't see the pipe coming in thru the axle but its in the same place as standard

http://img517.imageshack.us/img517/1897/picture002zkk.jpg
the secondary pipe, i couldn't get any further away but i think you can see enough of it

hope they helps