PDA

View Full Version : Dump Valve Blues.



Paullyp
Saturday 21st May 2005, 02:41
I fitted A Manual Boost Control, I joined the wastegate actuator pipe to the MBC and in turn joined the other end of the MBC to the to the compressor pipe and blanked off the blow off hose . As a result I have no pipework going to the solenoid ...is this correct, I really need your help on this, Cheers Paul.

Pedro Fandango
Saturday 21st May 2005, 08:44
yeh that is how mine is done, the pipe coming off the turbo going into the MBC, the outlet of the MBC going to the waste gate then remove the remaining pipe from the control solenoid & blank the hole now left in the air inlet pipe.

make sure the MBC is fitted the right way round & isn't set to high

& out of interest if your question was about MBC's, then why's the thread titled dump valves blues lol