PDA

View Full Version : help dead volvo t5r!!!!



robertbarryz250
Saturday 21st March 2009, 18:10
ryt just lucking for sum advice or wiring diagrams,iv recentley rebuilt my engine on my t5r and just got it back in everything seems to be working except theres no spark? so i checked the timing and it was ok and replaced the distributer cap and coil still no luck any help please ???

Tomcat
Saturday 21st March 2009, 18:13
have you checked for voltage at the coil?, is the alarm/imobiliser off?,

dannt5
Saturday 21st March 2009, 19:15
I had the same prob when i rebuilt my R top end. Thought id got something wrong & tried all kind of things to get it going but the last thing i tried was the spare key....yep it started first turn...Doh!! Seems the key can loose its code if not used for a while,worth a try pal.

gareth
Saturday 21st March 2009, 21:48
Hi mate . Try the ignition relay and it's wiring. it's the grey one under the plastic fan cowling just behind the rad when you open the bonnet. If this or it's wiring is dodgy the car will crank all day and never fire. It's also easy to disturb doing under bonnet work so well worth a look.
If you need pics or a simple wiring diagram pm me.

t5 stealth
Sunday 22nd March 2009, 19:15
ignition module..screwed against the nsf inner wing,under bonnet,behind the headlight...that powers the coil & triggers the spark.....

gareth
Monday 23rd March 2009, 09:34
Hope this helps.
This is the relay and connections. Excuse the drawing skills!
The connection diagram is supposed to be looking at the female sockets on the connector with the relay removed.
Don,t worry about the two in red just try a wire junper across the other two.
Sorry the colours aren't correct, do have a colour correct pic somewhere, just can't find it!
http://farm4.static.flickr.com/3600/3378894878_bd096e2d98_o.jpg
http://farm4.static.flickr.com/3473/3378076249_02efea9ea8.jpg

timbo_1975
Monday 23rd March 2009, 09:34
Have you replaced the two earth straps back onto the rear of the cam carrier ?

gareth
Monday 23rd March 2009, 09:37
If all above fails check the cam position and flywheel sensor too.