PDA

View Full Version : Breather type hole in the rocker cover?


bumptj
Sunday 18th January 2009, 15:23
Does anyone know what the hole between 3+4 cylinder is? Its about the size of a 10p piece with 2 threaded holes either side of it.
Tomcat
Sunday 18th January 2009, 15:41
?? Er take a pic so we know what your talking about.
Saaamon
Sunday 18th January 2009, 18:04
Your not looking at the core plug are you?

Saaamon
bumptj
Sunday 18th January 2009, 19:42
Not the best picture but its pitch black outside....lol

http://i60.photobucket.com/albums/h11/BUMPTJ/VOLVOBREATHERHOLE.jpg
flyingbrick
Tuesday 20th January 2009, 20:56
:welcome:Were has your other finger gone mate........
bumptj
Tuesday 20th January 2009, 21:30
Damn!!!Someone spotted I was an Alien....
Mental Wealth Doctor
Tuesday 20th January 2009, 21:39
Im proberbly wrong, but it does a good job of catching oil when breather pipe comes off, saving your plugs
gazbak1
Wednesday 21st January 2009, 00:11
i dont know about the hole but the screw holes are for the later type ignition packs.

gazbak1
bumptj
Friday 23rd January 2009, 21:45
Nah it's not for draining the oil, I had to cover it up because it keeps blowing oil out which collects along the back of the cam cover, and its not for a coil pack as the hole and the 2 threaded holes are only in that position.
t5 pete
Friday 23rd January 2009, 21:47
yeah i found out what it was today when putting new ht leads on and a bit of the clip that hold the leads together fell in it i only just managed to get it out
bumptj
Friday 23rd January 2009, 21:51
yeah i found out what it was today when putting new ht leads on and a bit of the clip that hold the leads together fell in it i only just managed to get it out

I take it your is open as well Pete? I just thought that something was missing.