nath t5's brakes ????????????????????

[t5 pete]

Hello as some of us on here are unsure what brakes nath t5 has fitted to his car due to them being alot larger than the 302mm i came accross these and they do look the same

[cameron]

Bloody hell pete them disks are " huge "

Lee

[pangster]

nice brakes.. not too many Volvo's going around with the 320mm factory upgrade from what I can tell.. or the Ohlins adjustable suspension as they were pretty expensive options when the cars were new.. I would say that if Nath has them on his car then he's very lucky! lol!!..

[cameron]

Not so lucky when he has too replace them though, especially if he goes like for like.

Lee

[pangster]

Not so lucky when he has too replace them though, especially if he goes like for like.

Lee

lol!! - true mate.. given how rare they appear to be I would imagine they are a dealer only part!.. yikes!!..

[walter leever]

Hello as some of us on here are unsure what brakes nath t5 has fitted to his car due to them being alot larger than the 302mm i came accross these and they do look the same

this is the so called police-upgrade.

320mm original volvo,you'll be lucky if you can source a set.

here it's impossible to find a set,gone.

But if you can order one for me aswell:B_thumb:

[Tomcat]

Anyone know how much they are?, would be interesting to compare them against a Brembo upgrade..

[walter leever]

Anyone know how much they are?, would be interesting to compare them against a Brembo upgrade..


this is a big brake kit(volvo)don'nt know whether Brembo makes these.

there are bbk available(330mm-4/6piston,porsche)cost about 1400-1500 euros:cuckoo:

[t5 pete]

Anyone know how much they are?, would be interesting to compare them against a Brembo upgrade..

The best bet would be is to ask rufe surley they do spares for these

[nathT5]

hope i can get the same parts when i need to replace these (on the cheap) :help:
what calipers will they be? i,m told they use C70 pads :confused:

[Enigma666]

hope i can get the same parts when i need to replace these (on the cheap) :help:
what calipers will they be? i,m told they use C70 pads :confused:

I'll be changing out my pads in the next week or so I'll send you my old ones if you want them to compare with yours at all?

[nathT5]

just found the discs on www.partsforvolvos.com £51.75 inc each.
they also list the full kit on there for £400.

not bad, i expected a lot more...

[nathT5]

this is the PFS kit, complete with discs, pads, hoses and wider carriers for £408 inc :B_thumb:

[Tomcat]

Cool, that's a damn good price for discs that size. I Wonder if you can buy the discs cross drilled and grooved from other suppliers.

[volvokid]

hope i can get the same parts when i need to replace these (on the cheap) :help:
what calipers will they be? i,m told they use C70 pads :confused:

wow you went to town with the red calliper paint even the pads got the works lol

[p fandango]

this is the PFS kit, complete with discs, pads, hoses and wider carriers for £408 inc :B_thumb:
the PFS kit isn't the same, the PFS 320mm kit is intended for S60/V70 not 850's. If you also look at yours you've got a seperate alloy centre bell while the PFS kit is a single piece disc

[nathT5]

the PFS kit isn't the same, the PFS 320mm kit is intended for S60/V70 not 850's. If you also look at yours you've got a seperate alloy centre bell while the PFS kit is a single piece disc

i noticed that but just assumed it was because they were a different make of disc.
as for fitment, can you use V70 parts on an 850? i thought they were basically the same car.
i should still be able to fit the PFS discs on mine should,nt i?

[Wombatbomb]

i noticed that but just assumed it was because they were a different make of disc.
as for fitment, can you use V70 parts on an 850? i thought they were basically the same car.
i should still be able to fit the PFS discs on mine should,nt i?

850's and P1 x70's share a lot of similarities. That PFV upgrade is for the P2 car.

[nathT5]

wow you went to town with the red calliper paint even the pads got the works lol

i did, did,nt i?

always do this on all my cars, looks smart with big dark alloys.
i rub everything with a wire brush and matt black all the suspension parts.
primer the brake parts and blast them with ordinary car spray, you dont need expensive caliper paint.
it goes all over the disc but once driven, it comes off leaving a clean contact area.
it never burns off, ive even used it on my race cars.

[nathT5]

850's and P1 V70's share a lot of similarities. That PFV upgrade is for the P2 car.

so does the 850, V70 P1 and P2 use the same stud pattern on the discs?
or is the P2 a different fitment?

[redbaron]

i think it would be the same pattern,or do volvo pcd's change across the range?i though they were mostly 5x108

[snoop69]

Cool, that's a damn good price for discs that size. I Wonder if you can buy the discs cross drilled and grooved from other suppliers.

Have a word with Luggy as his mate at DP Autosport works in the milling
industry & showed Niles & myself a new set of discs he grooved himself
at work.

[Cali-T5]

http://www.partsforvolvosonline.com/product_info.php?cPath=52_616&products_id=3658

Is this not the 320 kit for the 850 then ? And only £325.25

[Enigma666]

302 on that link Cali mate :(

[Cali-T5]

oh yer, me being thick. can't bloody read. I'll get back in my box

[cameron]

If you were feeling flush you could have 336mm disks !

Check these bad boys out http://www.partsforvolvosonline.com/product_info.php?cPath=52_479_480&products_id=2831

Bit pricey though at £1400 :jaw:

Lee

[t5 pete]

If you were feeling flush you could have 336mm disks !

Check these bad boys out http://www.partsforvolvosonline.com/product_info.php?cPath=52_479_480&products_id=2831

Bit pricey though at £1400 :jaw:

Lee

I can beat that have a look at these bad boys not bad for £2303.45
http://www.partsforvolvosonline.com/product_info.php?cPath=52_479_480&products_id=2830

[pangster]

i think it would be the same pattern,or do volvo pcd's change across the range?i though they were mostly 5x108

If you look at the online catalogue here:

http://www.brakesinternational.com/

It will give you all the brake dimensions you need to be able to compare them..

[nathT5]

If you look at the online catalogue here:

http://www.brakesinternational.com/

It will give you all the brake dimensions you need to be able to compare them..

thanks pangster, thats a big help.

according to that, the post 2000 P2 V70s discs are 28mm thick and so are mine.
all the other dimensions are the same too, so as long as the stud pattern is the same they will fit.
and i,m sure they are all 5x108mm.

[redbaron]

in relation to the v70 kit on nath t5's car,will it fit an 850 straight away or is milling and farting about required?