Poly tie bar bushes available from PFV

[Redbrick]

Both replacement poly bushes for the tie bar are now available from PFV.

Ordered mine this afternoon- got to be cheaper than getting them from IPD.

[S60-MBS]

got my D5 poly bushed already by Tim williams ,thing really makes a difference and is alot cheaper then the IPD which is exactly the same product according to Tim.

[dave stew]

I take it this is the upper tie bar that connects to the 'strut brace'? I heard that if this is solidly bushed it transmits more noise into the cabin...

[S60-MBS]

No Dave this under the car toward the front ,arrowed here in piccy

http://i97.photobucket.com/albums/l204/s60mbs/tie.gif

[dave stew]

Ah, that one. I've just had a new clutch fitted (subframe dropped etc) so I am after doing that mod. Magic darts!

[Redbrick]

got my D5 poly bushed already by Tim williams ,thing really makes a difference and is alot cheaper then the IPD which is exactly the same product according to Tim.

Interesting. Have you had both bushes done? PFV only did the smaller bush but have the larger one as well- the first time I've seen the large bush available in the UK.

As you have the sotware we can't mention ;) could you give me the torque rates for the bolts?

Many thanks.

[S60-MBS]

I will pm you in a while Andy .got my hands full right now..

[Redbrick]

I will pm you in a while Andy .got my hands full right now..

YIKES!!! :yikes: Sounds like fun. lol

No rush at all, not doing it until next week.

[S60-MBS]

PM sent Andy ,

regards
Mo

[t5 pete]

does this poly bush fit the 850 one????????

[S60-MBS]

Not sure Pete.

[Redbrick]

does this poly bush fit the 850 one????????

The PFV part number (904479) for the tie bar is the same for 850 as S60/V70. I'm guessing that the poly bushes would fit the 850 tie bar- worth ringing them to check though!

V70/S60 http://www.partsforvolvosonline.com/product_info.php?cPath=105_769_777&products_id=5774

850 http://www.partsforvolvosonline.com/product_info.php?cPath=105_769_773&products_id=4479

[Redbrick]

Quick delivery!

Confused however.... why two of the smaller bushes and why the strange angle on the larger bush?

Do these look right?

Might have a spare smaller bush up for grabs if it fits!

http://i4.photobucket.com/albums/y132/apurnell1970/Volvo/002-2.jpg

[S60-MBS]

Tim Williams be the best man to confirm he had mine pre installed and ready to go.

[pangster]

Quick delivery!

Confused however.... why two of the smaller bushes and why the strange angle on the larger bush?

Do these look right?

Might have a spare smaller bush up for grabs if it fits!

http://i4.photobucket.com/albums/y132/apurnell1970/Volvo/002-2.jpg

looks fine to me.. it also looks like they possibly gave you 2 smaller bushes by mistake! lol!! :) the bigger bush is angled like that due to how the mount is shaped.. FWIW I've just fitted my IPD bush (large) and Powerflex (small) in the tie bar.. shipping isn't really that expensive if you email IPD for a quote IMHO - especially if you are buying a few bits! :) - here's a post that might help you fit it:

http://www.vpcuk.org/forums/showpost.php?p=194686&postcount=32

HTH

[pangster]

this might help as well:

http://www.vpcuk.org/forums/showthread.php?t=17411

HTH

[t5 pete]

where did you get the smaller one from paul i cant find them on ipd website

[pangster]

where did you get the smaller one from paul i cant find them on ipd website

its from PFV as IPD don't do the smaller bush.. it's a Powerflex item and exactly the same as Redbricks one.. when I bought mine no one company made both bushes.. which is why I've ended up with a Powerflex and IPD hybrid effort! lol!!! :)