PDA

View Full Version : Turbo oil return seals



steveT5
Thursday 14th April 2005, 15:00
Hi All, I need to replace my turbo oil return seals.
There was a thread by Bracer with pics, but i can't find it. could anyone point me in the right direction ?
Also do the same part no's mentioned (30637866 and 3514546) apply to the V70 as well as the 850 ?
Thankyou,
Steve.

Rufe
Sunday 17th April 2005, 08:37
V70 T5's (new shape v70 and older v70) and all 850 T5's share the same oil return seals mate.

30637866 and 3514546, like you said.

andi t5
Sunday 17th April 2005, 10:45
jobs shown in some detail on bay 13 of the volvospeed site

spesh
Sunday 17th April 2005, 17:48
Not a hard job about 1 hour by the time you jack the car up and down and stuff, but pics would be best to explain, you have to take the water feed and the oil feed off the turbo (both 17mm) as the make it very difficult to take the oil return off in place, make sure you don't lose the copper washers, undo the oil return,two 5mm allan key heads, to take it off you pull it outwards slightly and lift, there will be a small green o ring around the bottom change that,that's the comman fault!!!! Put back together! Also check the gasket on top of the return!!!

steveT5
Sunday 17th April 2005, 20:25
Thanks for the info all !