Vacuum tree - P1 V70R

[youngteam]

After reading various posts on vacuum hoses, I set out to check mine. I was expecting to find the vaccum tree looking like the below photo, but on mine I don't have any hoses attached, just the blanking cap/plugs. Is that how it's meant to be?

http://i42.photobucket.com/albums/e340/james2525/VacuumLeakatTree.jpg

[dicky b t5]

I might be wrong...But i dont remember mine looking like that.
When i fitted my Boost gauge a few weeks ago, i had 3 or 4 on the tree that were just capped off..?

[youngteam]

That picture is from the Volvo Speed forum, but mine doesn't have anything what so ever attached to it. Should it have?

[Andrew]

<clensed by author>

[youngteam]

Cool, so nothing to worry about then? Just seemed odd that they were all capped off. I guess I just need to check the vacuum pipes around the turbo.

[SAMXPJ]

Mine does'nt have any pipes attached either and my previous s70 did'nt, is this just for the me7 engines ???

[Dacvolvo]

Same here - most of mine are just capped.
As were mine...

[arbee]

I have only got two, one for the brake servo, the other dives under the inlet manifold. I beleive one goes to the controller for the variable inlet tracts on NA models. not sure about the 4th? EGR valve or is that leccy?

[youngteam]

Mine does'nt have any pipes attached either and my previous s70 did'nt, is this just for the me7 engines ???

Mine's not an ME7. I just assumed it would have at least one pipe attached.