PDA

View Full Version : Volvo Draper Service Light Reset Tool



Dacvolvo
Tuesday 12th September 2006, 08:28
Hi, Folks

Will this work on a 1998 R registration C70?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=020&item=300020055830&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

Ta.

thunderace
Tuesday 12th September 2006, 09:29
sorry to be a bit thick, but how do these work?
just by shorting a couple of pins?:confused:

Jaseb77
Tuesday 12th September 2006, 10:53
plugs into OBD II port in armrest.

should work fine, mines does

is your c70 ME7 (blue or black badge on front)
there were a few in 98

Regards
Jase

Dacvolvo
Tuesday 12th September 2006, 22:04
plugs into OBD II port in armrest.

should work fine, mines does

is your c70 ME7 (blue or black badge on front)
there were a few in 98

Regards
Jase
Hey, Jason

Mine has a black badge on the grill - what's that make mine?

bubba_1986
Tuesday 12th September 2006, 22:08
Hey, Jason

Mine has a black badge on the grill - what's that make mine?

That means it does not run ME7, which means u dont have the OBD II port

Sorry wont work

fraz13
Tuesday 12th September 2006, 22:13
You will have a OBD11 port in the armrest, All C/S/V70's do and Jase's is the same as yours so it should in theory work ;)

bubba_1986
Tuesday 12th September 2006, 22:16
You will have a OBD11 port in the armrest, All C/S/V70's do and Jase's is the same as yours so it should in theory work ;)

My mistake fraz, sorry, thought only the ME7 cars have a OBD11 port :confused:

fraz13
Tuesday 12th September 2006, 22:31
Only ME7 cars can be tuned through the OBD11 post as far as I know ;)

bubba_1986
Tuesday 12th September 2006, 22:33
Right i see, thats where am getting mixed up.

I was thinking the Pre ME7 cars couldn't be tuned though OBD11 port because wasn't one there lol

Opps

ah well, you learn something new each day

Dacvolvo
Wednesday 13th September 2006, 17:22
Yeah - I've got the OBD11 port under my centre arm rest. So it should work... In theory...?

Ha ha ha - I'll buy it just now then and let you know the outcome once it arrives and my service light comes on for the first time ;)

BlackBeast
Wednesday 13th September 2006, 17:31
You should save yourself the £30 and just take the bulb out, fair enough if it can read all the codes aswell, bit steep for just one bulb dont u think?

T5frankie
Wednesday 13th September 2006, 19:21
Hi, Folks

Will this work on a 1998 R registration C70?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=020&item=300020055830&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

Ta.
i just pressed the mileage button down with ignition off for ten seconds turned ignition on and let go after ten seconds (well at least something very similar) and that worked a treat on my v70 turned the light straight off.

Dacvolvo
Wednesday 13th September 2006, 21:49
i just pressed the mileage button down with ignition off for ten seconds turned ignition on and let go after ten seconds (well at least something very similar) and that worked a treat on my v70 turned the light straight off.
Doesn't seem to work on the 1998 R reg model.

P.S. I know it's only a bulb - BUT I HATE BULBS!!!! AAAARRRGGGHHHHHH!!!!

T5frankie
Thursday 14th September 2006, 17:43
Doesn't seem to work on the 1998 R reg model.

P.S. I know it's only a bulb - BUT I HATE BULBS!!!! AAAARRRGGGHHHHHH!!!!
i think it has to flash then you take your finger off then turn ignition off and on again it is definately something like that, got that piece of advice on this forum ask about someone will know for sure.

thunderace
Friday 27th October 2006, 12:45
works fine on mine, reset at 3rd attempt

i'll bring it to next local meet :)

Andrew
Friday 27th October 2006, 13:29
<clensed by author>