PDA

View Full Version : hot starting problem



t5tart
Saturday 17th June 2006, 15:51
only since the weather got hot if i run the t5 and then pop in a shop leave it stood for 5 mins and get in and restart it
it starts then dies b4 leveling the tickover then it wont start without letting it stand a couple of mins


anyone got any ideas ?

t5tart
Tuesday 20th June 2006, 20:00
no one any clues hints or tips ??

motly crue
Thursday 22nd June 2006, 14:47
Hi mate,you could check one of these
1.your eletrical connections-engine or battry
2.fuel pump non-return valve
3.fuel pressure/dilivery rate/fuel pressure regulator
4.fuses/fuel pump/you'r engine control relay/relay module
5.crap in your fuel/fuel filter
6.injectors
7.ignition system
8.air filter
9.air intake system/vacume system-leaks
ckp,evap,cmp sensor,vaf,tp,maf,map,etc,ecm,etc,tp,your engine compression.
exhaust system or the cat,
have you check'd if you have any fault codes coming up?
hope this gives you some help whith your problem:)

Niles
Saturday 24th June 2006, 14:55
Ive got the same problem, my outside air temp says 40+c, I have to let the engine cool before it'll start, when it duz it 'hunts' for a minute or 2.

t5tart
Sunday 25th June 2006, 21:59
ok done a full stage 0 recently
new vac lines filters inc fuel
no fault codes
i would hae thought half of those problems would be picked up by the ecu ??